Ford 4.6 & 5.4 Liter V8 Stainless Exhaust Manifold Studs Stud Kit

Buy with confidence! this kit has been developed, researched AND INSTALLED by an MSTC staff member. We have sold these kits to thousands of satisfied customers. These engines are notorious for needing the exhaust manifolds and hardware replaced. Why use steel hardware that is just going to rust again? We used this hardware to replace the passenger side manifold on our own plow truck, and when we had to replace the driver side manifold a few months later, we realized we should offer them as a kit.

Will not rust like the original studs. This is a set of eight stainless steel studs with an allen drive for easy installation and serrated face flange nuts. Does one side -- far less $$ than replacement hardware from Ford. We also offer a tap and drill kit to help with this installation, you can find it on our Amazon storefront.

Studs for the Y pipe are not included. Since then we have seen them used on applications ranging from our F250 to a 9 second, turbocharged Mustang Cobra. Note: for clarification, these are meant to secure the exhaust manifold to the cylinder head, YOU WILL NEED ONE KIT PER MANIFOLD. They will replace the factory hardware that rust and break on Ford 4.

6liter and 5. 4liter engines.

---

Dorman 674-694 Exhaust Manifold Kit

Cast iron or stainless tubular construction protects against warping and/or cracking. Original equipment oe number: 3l3z 9430-da, 9l3z 9k494-a, 7c3z 9430-A, 9L3Z-9430-D. Leak-resistant for long-lasting performance. Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.

More like a complete kit than a single part, many of Dorman's Exhaust Manifolds include gaskets and hardware for a complete installation. A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

.


Similar products:

---

Shop Iron 16023 3/8" Drive Stud Extractor

The hex drive can be a driver with a wrench, ratchet, or impact tool. The shop iron 3/8" drive stud Extractor is ideal for removing stripped, rusted, broken or smooth studs. Ideal for removing stripped, rusted, broken or smooth studs. Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.

Cast iron or stainless tubular construction protects against warping and/or cracking. Limited lifetime warranty. This tool will work effectively on 1/4" to 1/2" 6mm-12mm studs. A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Leak-resistant for long-lasting performance.

Impact gun compatible. Hex drive can be a driver with a wrench, ratchet, or impact tool. Original equipment oe number: 3l3z 9430-da, 9l3z 9k494-a, 7c3z 9430-A, 9L3Z-9430-D. Fits 1/4" to 1/2" 6 - 12mm studs.


Similar products:

---

Dorman 674-559 Exhaust Manifold Kit

Cast iron or stainless tubular construction protects against warping and/or cracking. A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Leak-resistant for long-lasting performance. Original equipment oe number: 3l3z 9430-da, 7c3z 9430-A, 9l3z 9k494-a, 9L3Z-9430-D.

Fits 1/4" to 1/2" 6 - 12mm studs. Hex drive can be a driver with a wrench, ratchet, or impact tool. A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold. Leak-resistant for long-lasting performance. Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold. Ideal for removing stripped, rusted, broken or smooth studs. Original equipment oe number: XL3Z 9430-GA.

Impact gun compatible. Limited lifetime warranty.


Similar products:

---

Fel-Pro Ms96679 Exhaust Manifold Gasket Set

Original equipment oe number: 3l3z 9430-da, 9l3z 9k494-a, 7c3z 9430-A, 9L3Z-9430-D. Fits 1/4" to 1/2" 6 - 12mm studs. Impact gun compatible. Application-specific design for a perfect fit. A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Leak-resistant for long-lasting performance.

Hex drive can be a driver with a wrench, ratchet, or impact tool. Ideal for removing stripped, rusted, broken or smooth studs. Unsurpassed quality you can trust. Fel-pro gaskets offers 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Cast iron or stainless tubular construction protects against warping and/or cracking. Limited lifetime warranty. Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.

Leak-resistant for long-lasting performance. Meets or exceeds all original equipment specifications.


Similar products:

---

Alden 8440P Pro Grabit Broken Bolt and Damaged Screw Extractor 4 Piece Kit

Limited lifetime warranty. Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold. Leak-resistant for long-lasting performance. The hardened tip works on jadded, uneven, and rough surfaces, so no bolt preparation is required. Pro-grabit works on damaged screws and broken bolts from as small as #4 screw to as large as a 3/8" bolt.

It quickly and easily removes most damaged screw types such as Hex, and Square Drive from wood, Phillips, Torx, plastic or metal up to 3 inches in length. Highest quality steel used and made in the USA. Impact gun compatible. Two-step drill bit and extractor in one tool extracts broken bolts and damaged screws fast; use in reverse only when drilling and extracting with reversible hand held power drill.

Multiple tools not required. Self centering drill tip; no walking or wandering. Validated for fit, form and function. Made from m2 hss tool steel and made in USA. Cast iron or stainless tubular construction protects against warping and/or cracking. Engineered for the sealing repair environment. Pro-grabit is self-centering so it will not wander or walk.




Similar products:

---

GASKET - Ford 9L3Z-9448-A

Two-step drill bit and extractor in one tool. Meets or exceeds all original equipment specifications. Highest quality steel used and made in the USA. Genuine ford part 9L3Z-9448-A. Original equipment oe number: 3l3z 9430-da, 7c3z 9430-A, 9l3z 9k494-a, 9L3Z-9430-D. Fits 1/4" to 1/2" 6 - 12mm studs. Original equipment oe number: XL3Z 9430-GA.

Application-specific design for a perfect fit. A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Warrantied by Ford Motor Company. Ford quality construction. Engineered for the sealing repair environment. Ideal for removing stripped, rusted, broken or smooth studs.

A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Multiple tools not required. Self centering drill tip; no walking or wandering. Easy to use. Tempered twice for extra hardness. Cast iron or stainless tubular construction protects against warping and/or cracking.




Similar products:

---

JBA 1676S 1-5/8" Shorty Stainless Steel Exhaust Header for Ford F-150 5.4L 3 Valve 04-10

Unsurpassed quality you can trust. Hot rod magazine rated headers as one of the top 10 power parts installed on a vehicle. With durable stainless steel construction that can survive the abuse of racing, and daily driving, towing, these headers can take a beating. Extra thick collector domes. Cast iron or stainless tubular construction protects against warping and/or cracking.

Jba shorty headers are significantly less restrictive than the stock manifolds on a vehicle and dramatically increase the power and efficiency of an engine. Easy to use. Tempered twice for extra hardness. Jba shorty headers are one of the best performance upgrades available for any application. Each system includes high quality hardware and thorough instructions for a professional no-leak installation.

Customer will be contacted if core charge applies to part. Mandrel bent stainless steel tube. Leak-resistant for long-lasting performance. Patented JBA Firecone collector. No grinding, center punching required. Can be used in quick change chucks.


Similar products:

---

Dorman 674-695 Exhaust Manifold Kit

Validated for fit, form and function. Includes heat-shield for protection of hoses, wiring, and other engine components. Patented JBA Firecone collector. Leak-resistant for long-lasting performance. Meets or exceeds all original equipment specifications. Original equipment oe number: XL3Z 9430-GA. Warrantied by Ford Motor Company.

Engineered by Ford specifically for your vehicle. Extra thick collector domes. Leak-resistant for long-lasting performance. Two-step drill bit and extractor in one tool. Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold. Highest quality steel used and made in the USA. Genuine ford part 9L3Z-9448-A.

A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Unsurpassed quality you can trust. Leak-resistant for long-lasting performance. Ideal for removing stripped, rusted, broken or smooth studs. Cast iron or stainless tubular construction protects against warping and/or cracking.




Similar products:

---

ATP Automotive Graywerks 101361 Exhaust Manifold

3/8 inch thick cNC laser-cut flanges with oversized exhaust ports. Hex drive can be a driver with a wrench, ratchet, or impact tool. Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold. Engineered for the sealing repair environment. Factory style emission connections. Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.

Highest quality steel used and made in the USA. Genuine ford part 9L3Z-9448-A. Industry Leading Limited Lifetime Warranty. Upper and lower flange gaskets along with lower flange hardware are included Heat shields and plugs are included where needed. A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards.

Each unit is machine finished to guarantee flanges are perfectly flat, mount evenly and do not leak. Multiple tools not required. Self centering drill tip; no walking or wandering. Ideal for removing stripped, rusted, broken or smooth studs. Meets or exceeds all original equipment specifications.


Similar products:

---

OTC 6987 Metric Stud Remover Set - 4 Piece

Leak-resistant for long-lasting performance. Leak-resistant for long-lasting performance. Ford quality construction. A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. Hex drive can be a driver with a wrench, ratchet, or impact tool. Application-specific design for a perfect fit.

Upper and lower flange gaskets along with lower flange hardware are included Heat shields and plugs are included where needed. Precision machine finished providing smooth installation and leak free performance. Cast iron or stainless tubular construction protects against warping and/or cracking. Multiple tools not required.

Self centering drill tip; no walking or wandering. Patented JBA Firecone collector. Designed and tested to reach studs in difficult work areas. Includes otc 6987-6 6mm stud remover, otc 6987-8 8mm stud remover, otc 6987-10 10mm stud remover, and OTC 6987-12 12mm stud remover. Meets or exceeds all original equipment specifications.

Set features a 3/8 inch drive for 6mm and 8mm stud sizes, and a 1/2 inch drive for 10mm and 12mm stud sizes. Customer will be contacted if core charge applies to part.


Similar products: