GemRed Digital Level Box Protractor Angle Finder Level Gauge Bevel Gage Inclinometer with Backlight and Magnetic Base 82412-XSB Angle Gauge with Hold Function

#ad
Guilin GemRed Sensor Technology Co., Ltd #ad - Measuring plane contains magnets which can be attached to the surface to be measured. Automatic shut-off after 5 minutes. Packing contains】digital angle gauge*1, 1. 5v alkaline battery*1, storage pouch*1, instruction*1. Measures in DEGREE only. New function】gemred xsb angle gauge has a HOLD button to freeze the display for easier reading.

Aluminum framework & magnetic base】the digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. Accuracy: 02°. With only one aaa battery, the digital angle gauge works 50 hours averagely. Gemred xsb level box digital protractor Angle Gauge Product Description XSB is base on 82412 level box.

Digital protractor/angle gauge applications setting pitch angle of helicopter setting blade angle of Miter Saws Setting blade angle of Circular Saws Tool setting on Lathes Setting workpiece angle for milling Drainage angles and run off slopes Grader and tractor work alignment Platform monitoring Features with wide measuring range of +/-180 degree 0 ~ 360 degree with 0

GemRed Digital Level Box Protractor Angle Finder Level Gauge Bevel Gage Inclinometer with Backlight and Magnetic Base 82412-XSB Angle Gauge with Hold Function #ad - 1 repeatability powerful built-in magnets on the base secures the attachment to any iron surfaceEasy-read large readout LCD display Fast and accurate measurements Auto power off after 5 minutes of no operationAccuracy: +/- 01 degrees at 0 and 90 degrees and 02 degrees the remainderResolution: 01 degree measuring range: 2*180degree waterproof: IP54Power: 1*AAA battery Upgraded measure range】measure range: 2*180 degree.

More information about Guilin GemRed Sensor Technology Co., Ltd #ad

GemRed 82305 Digital Protractor Angle Finder Stainless Steel Ruler200mm/7inch

#ad
Guilin GemRed Sensor Technology Co., Ltd #ad - Accuracy ±03°. Ruler and protractor combination for easy measuring. Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN. Quick and clear digital readout. Total length 400mm. Zeroing at any angle for relative measuring. Durable stainless steel body provide years' using. It may apprear on brand-new product.

No reverse angle measurement. Scratches on rulers are resulted from touching with each other. The display could not read up-side-down. Locking screw for holding any angle. Display resolution 01 degree.

More information about Guilin GemRed Sensor Technology Co., Ltd #ad


Similar products:


Neoteck Aluminum Digital Angle Finder Protractor 225° 16 inch Backlit LCD Digital with Horizontal and Vertical Bubble - Black

#ad
Neoteck NTK079-US #ad - Will not display a number on lcd, just only Assist You to Judge If It Is Horizontal / Vertical or Not. It can't hold the Angle Firm Completely! It may apprear on brand-new product. Digital angle finder protractor】 with High Accuracy, Delicate Design and Modern Appearance, An Interior Designer Should Have One!

Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN. Quick and clear digital readout. Overview: this digital inclinometer protractor is high-accurate, with black aluminum design and Modern Appearance. The knob is Just for Loosening and Tightening. High accuracy】 angle range is 0-225°, measuring precision: ±0

Neoteck Aluminum Digital Angle Finder Protractor 225° 16 inch Backlit LCD Digital with Horizontal and Vertical Bubble - Black #ad - 5°, increase/Decrease Angle: 01°. Will not display a number on lcd, just only assist you to judge If It Is Horizontal / Vertical or NotSpecifications: Length: 16 inch/ 400mm Increase/Decrease Angle: 01° measuring range: 0~225° Measuring Precision: ±05° battery: 9v 6f22 working temperature: -10°c~+50°c features: easily readable lcd display with horizontal and vertical bubble level Data Holding Function to Keep the Angle Value Backlight Design to Keep Its Normal Use on Dark Light Automatically Shut Off after 5 Minutes to Prolong the Batteries' LifeAccurate measurement-- Angle Range is 0-225°, Measuring precision: ±0

5°, increase/Decrease Angle: 01° package included: 1 x angle finder protractor 1 x Portable Bag 1 x 9V 6F22 Battery 1 x User Manual Ruler and protractor combination for easy measuring.

More information about Neoteck NTK079-US #ad


Similar products:


Titebond 16330 TiteBrush Applicator

#ad
Titebond 16330 #ad - Titebond titebrush is a durable glue brush with 100% silicone bristles and a plastic handle built to last. The knob is Just for Loosening and Tightening. 100% silicone bristles. No reverse angle measurement. Scratches on rulers are resulted from touching with each other. Accuracy ±03°. Data hold】if you want to use data holding function, you need to press the HOLD Button in Red rather than Twist the Knob.

Ruler and protractor combination for easy measuring. When finished let glue dry and simply peel or riffle the bristles for easy cleanup. Will not display a number on lcd, just only Assist You to Judge If It Is Horizontal / Vertical or Not. Backlit lcd display】 come with backlit led display Which Makes it Possible to Read the Data Clearly, Even under a Low Light Circumstance.

Titebond 16330 TiteBrush Applicator #ad - It’s ideal for use with most woodworking and polyurethane glues eliminating the need for disposable brushes, fingers and other spreading tools. Durable stainless steel body provide years' using. The display could not read up-side-down. Total length 400mm. Zeroing at any angle for relative measuring. With horizontal and vertical bubble level】 it also can be used like a spirit level, helping you to Check and Calibrate NOTE: It is NOT a Digital Level.

More information about Titebond 16330 #ad


Similar products:


POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Hex Bolts and WashersSet of 10

#ad
POWERTEC 71068 #ad - The display could not read up-side-down. High accuracy】 angle range is 0-225°, measuring precision: ±05°, increase/Decrease Angle: 01°. Easy use and works with any t-track that accepts standard 1/4-inch bolt heads. Durable stainless steel body provide years' using. Ruler and protractor combination for easy measuring.

Fasteners can be used with material that is less or equal to 1-inch thickness. Great for Jig building and other projects. Total length 400mm. Zeroing at any angle for relative measuring. Paddle: ideal for finer detail work, such as mortise and Tenon, dovetail and finger joints, as well as moldings. Ideal for woodworking & crafts.

POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Hex Bolts and WashersSet of 10 #ad - The knob is Just for Loosening and Tightening. Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN. Quick and clear digital readout. Extremely easy to clean. It may apprear on brand-new product. Digital angle finder protractor】 with High Accuracy, Delicate Design and Modern Appearance, An Interior Designer Should Have One!

Accuracy ±0

More information about POWERTEC 71068 #ad


Similar products:


Fits Chisels 1/8" to 1-7/8", Fits Planer Blades 1-3/8" to 3-1/8" - ATLIN Honing Guide

#ad
ATLIN WO1002A #ad - 100% silicone bristles. Easy use and works with any t-track that accepts standard 1/4-inch bolt heads. Durable stainless steel body provide years' using. The knob is Just for Loosening and Tightening. High accuracy】 angle range is 0-225°, measuring precision: ±05°, increase/Decrease Angle: 01°. Includes 10 sets of 1/4-inch thru hole knobs, 1/4-20 x 1-1/2-inch bolts and washers.

Includes flat jaws for clamping mortise chisels, and grooved jaws for clamping paring chisels and planer blades. Built to last - the atlin honing tool features a hardened steel roller wheel which will not wear down over time or develop flat spots. The display could not read up-side-down. Extremely easy to clean.

Fits Chisels 1/8" to 1-7/8", Fits Planer Blades 1-3/8" to 3-1/8" - ATLIN Honing Guide #ad - Ruler and protractor combination for easy measuring. It may apprear on brand-new product. Digital angle finder protractor】 with High Accuracy, Delicate Design and Modern Appearance, An Interior Designer Should Have One! Accuracy ±03°. What chisel and plane sizes will this tool support? the atlin honing jig has 3 sections for clamping your tools which are all fully adjustable: * the upper jaws clamp plane irons and adjust from 1-3/8" to 3-1/8" in width * The lower jaws clamp paring and low-angle chisels and adjust from 1/8" to 1-7/8" in width * Under the lower jaws, flat spots clamp mortise and high-angle chisels and adjust up to 1-7/8" in width CAN I ADJUST THE SHARPENING ANGLE? Yes! This tool allows you to sharpen at nearly any angle you please by adjusting tool projection.

More information about ATLIN WO1002A #ad


Similar products:


S SATC Grinding Wheel Sanding Discs 20 Pack Flap Disc 4.5 Grinding Wheel 4 1/2 Grinding Wheels T29 Flap Disc 4.5 Flap Disc Flap Disc 4-1 2 Inch 40/60/80/120 Grit 4 1/2 Flap Disc

#ad
SATC #ad - Product information   features: grinding wheel is made for zirconia alumina material: An excellent blend of zirconia and aluminum oxide grain which provides a very good cut rate to cost ratio. We would be delighted to help you and we will reply as soon as we can. Backlit lcd display】 come with backlit led display Which Makes it Possible to Read the Data Clearly, Even under a Low Light Circumstance.

Durable stainless steel body provide years' using. Grinding wheel is made for zirconia alumina material features large toughness value, fine crystal size and good wear resistance. And it's has durable fiberglass backing, which requires less pressure for heavy stock removal and provides with extra secure safe assurance.

S SATC Grinding Wheel Sanding Discs 20 Pack Flap Disc 4.5 Grinding Wheel 4 1/2 Grinding Wheels T29 Flap Disc 4.5 Flap Disc Flap Disc 4-1 2 Inch 40/60/80/120 Grit 4 1/2 Flap Disc #ad -  . Application:grinding wheel flap disc can be used for universal applications, tank constructions, machines, to rust removal and more. Any questions you have, please don't hesitate to contact us. Ruler and protractor combination for easy measuring. Cleaning of welding seams, switch boards, deburring, tank constructions, preparatory works for lacquer of carbodies, chamfer, machines, De-rust, sanding of wooden surface such as parquet for furniture.

Safe and effective. No reverse angle measurement.

More information about SATC #ad


Similar products:


POWERTEC 70136 4-Inch to 2-1/2-Inch Cone Reducer

#ad
Southern Technology LLC 70136 #ad - Accuracy ±03°. No reverse angle measurement. Scratches on rulers are resulted from touching with each other. The powertec 4-inch to 2-1/2-inch cone reducer allows you to connect 4-Inch port to a 2-1/2-Inch hose or a 2-1/2-Inch port to a 4-Inch hose. Cleaning of welding seams, chamfer, preparatory works for lacquer of carbodies, deburring, switch boards, De-rust, concrete grinding or finishing, ranging from metal or woodworking, stone smoothing or finishing, sanding of wooden surface such as parquet for furniture.

Note: sanding discs flap disc grinding wheel grinder shaping disc wood carving disc flap disc 4-1 2 inch grinding wheels sanding disc grinder disc disc sander. Grinding wheel is made for zirconia alumina material features large toughness value, fine crystal size and good wear resistance. And it's has durable fiberglass backing, which requires less pressure for heavy stock removal and provides with extra secure safe assurance.

POWERTEC 70136 4-Inch to 2-1/2-Inch Cone Reducer #ad -  . Application:grinding wheel flap disc can be used for universal applications, machines, tank constructions, to rust removal and more. Included with your order are illustrated, step-by-step instructions which detail how to get the perfect edge every time. Choose your own angle - all standard sharpening angles can be achieved using this sharpening jig by adjusting the tool projection.

Fasteners can be used with material that is less or equal to 1-inch thickness. Adaptable to most shop vacuum cleaner hoses with 2-1/4" OD connectors.

More information about Southern Technology LLC 70136 #ad


Similar products:


2 1/2" x 20' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW368

#ad
Peachtree Woodworking Supply Inc 368 #ad - The pvc hose is wrapped around a steel wire that can easily be grounded. Tight bending radius allows you to maneuver the hose anywhere in your shop. This heavy duty hose will not collapse under pressure from your dust collector. Hose is clear so you can see directly inside to spot any kind of obstruction. Includes flat jaws for clamping mortise chisels, and grooved jaws for clamping paring chisels and planer blades.

Built to last - the atlin honing tool features a hardened steel roller wheel which will not wear down over time or develop flat spots. Projection measurements for 25° and 30° angles are conveniently located on the packaging and on the cast aluminum body of the tool. Paddle: ideal for finer detail work, dovetail and finger joints, such as mortise and Tenon, as well as moldings.

2 1/2" x 20' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW368 #ad - Ideal for woodworking & crafts. 4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID. Data hold】if you want to use data holding function, you need to press the HOLD Button in Red rather than Twist the Knob. The pvc hose is wrapped around a steel wire that can be grounded easily.

Total length 400mm. Zeroing at any angle for relative measuring. Material:Hard zirconia alumina.

More information about Peachtree Woodworking Supply Inc 368 #ad


Similar products:


Milescraft 4009 FenceClamps- Universal

#ad
Milescraft 4009 #ad - Fasteners can be used with material that is less or equal to 1-inch thickness. It can't hold the Angle Firm Completely! Accuracy ±03°. Includes 2 clamps, which is all you will need! Ruler and protractor combination for easy measuring. Will not display a number on lcd, just only Assist You to Judge If It Is Horizontal / Vertical or Not.

Safe and effective. These compact, lightweight fence clamps allow you to secure a wide variety of shop-made auxiliary fences to your existing fences without the clamp getting in the way. The body of the chisel sharpener is crafted from durable cast aluminum. Cleaning of welding seams, concrete grinding or finishing, stone smoothing or finishing, chamfer, deburring, De-rust, switch boards, preparatory works for lacquer of carbodies, ranging from metal or woodworking, sanding of wooden surface such as parquet for furniture.

Milescraft 4009 FenceClamps- Universal #ad - Note: sanding discs flap disc grinding wheel grinder shaping disc wood carving disc flap disc 4-1 2 inch grinding wheels sanding disc grinder disc disc sander. Great for Jig building and other projects. Grinding wheel is made for zirconia alumina material features large toughness value, fine crystal size and good wear resistance.

And it's has durable fiberglass backing, which requires less pressure for heavy stock removal and provides with extra secure safe assurance.  . Application:grinding wheel flap disc can be used for universal applications, machines, tank constructions, to rust removal and more.

More information about Milescraft 4009 #ad


Similar products:


E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool

#ad
E-TING 4xSKU10645#4 #ad - Chisel sharpening has never been so easy. Holding capacity force: 198 lbs. Material: cold-rolled carbon steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips. 100% silicone bristles. Durable material. Size: approx.

Size:10 pcs of 40 grit, 5 pcs of 60 grit, 3 pcs of 80 grit, 2 pcs of 120 Grit with 4-1/2 x 7/8-inch. Advantage:grinding wheel has long lasting time. The pvc hose is wrapped around a steel wire that can easily be grounded. Tight bending radius allows you to maneuver the hose anywhere in your shop. This heavy duty hose will not collapse under pressure from your dust collector.

E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool #ad - Hose is clear so you can see directly inside to spot any kind of obstruction. Fits into a 3/8" hole in the top of the auxiliary fence. Backlit lcd display】 come with backlit led display Which Makes it Possible to Read the Data Clearly, Even under a Low Light Circumstance. No reverse angle measurement. Scratches on rulers are resulted from touching with each other.

Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN.

More information about E-TING 4xSKU10645#4 #ad


Similar products: