Hakko T18 Series Chisel Pack with T18-D08/D12/D24/D32/S3 Tips Model:

#ad
Hakko #ad - Pack of 5 different tips, one of each. T18-d32 - 3. 2 x 14. 5mm. T18-d08 - 08 x 14. 5mm. T18-d12 - 1. 2 x 14. 5mm. T18-s3 - 5. 2 x 18mm. Hakko t-18 series chisel tips for the fx-8801/FX-888/900M/907/913 Irons. T18-d24 - 2. 4 x 14. 5mm.

More information about Hakko #ad

Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 blue & yellow

#ad
Hakko FX888D #ad - Reliable digital technology by hakko – introducing the hakko fx-888D Excellent thermal recovery Heater output has been increased by 30% compared to that of the conventional models HAKKO 936·937. Thermal recovery graph rise time to 350Degree C is 20 seconds faster and tip temperature drop is reduced during continuous work.

This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life. Comes with fx-888d, a1559 sponge, fh800 iron holder, t18-d16 tip, fx-8801 soldering iron, A1561 cleaning wire, manual. Adjustable temperature control. Digital soldering station end safe.

Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 blue & yellow #ad - Also fx-888d delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity.

More information about Hakko FX888D #ad


Similar products:


Bundle Includes Soldering Station and CHP170 cutter

#ad
Hakko FX888D-23BY-Kit2 #ad - Thermal recovery graph rise time to 350Degree C is 20 seconds faster and tip temperature drop is reduced during continuous work. Even if you’re not familiar with operation of machines, you can operate it without difficulty. Temperature range 120° - 899° f 50° - 480° c. Fx-888d kit version with CHP170 cutter.

. Adjustable temperature control. Digital soldering station end safe version with Chp170 cutter. Comes with fx-888d, t18-d16 tip, fx-8801 soldering iron, a1559 sponge, A1561 cleaning wire, fh800 iron holder, manual. Adjustable temperature control. Simple and easy operation with only two operation buttons of UP and ENTER in the center, operation is simple and easy.

Bundle Includes Soldering Station and CHP170 cutter #ad - This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment. Hakko fx-888d performance comparison graph with conventional stations Able to shorten the time required for the same work and improve work efficiency significantly.

What’s more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over. Iron holder with full of functions An iron holder of the same color of a soldering station comes as a set. Designed to be user-friendly small footprint Compact station body requires a space of only 100 W x 120 D mm.

More information about Hakko FX888D-23BY-Kit2 #ad


Similar products:


Thermaltronics TMT-TC-2 Lead Free Tip Tinner 20g in 0.8oz Container

#ad
Thermaltronics FBA_TMT-TC-2 #ad - Adjustable temperature control. Thermaltronics tmt-tc-2 tip tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. Lead free RoHS Compliant. Comes with fx-888d, fh800 iron holder, a1561 cleaning wire, t18-d16 tip, a1559 sponge, fx-8801 soldering iron, manual.

Adjustable temperature control. Digital soldering station end safe version with Chp170 cutter. Digital display shows °ree; f or °ree; c. Digital soldering station end safe. Removes tip oxidation. Fx-888d kit version with CHP170 cutter. Temperature range 120° - 899° f 50° - 480° c. Rapidly re-tins badly oxidised soldering iron tips.

Thermaltronics TMT-TC-2 Lead Free Tip Tinner 20g in 0.8oz Container #ad - No-clean compatible formulation. Thermaltronics tmt-tc-2 tip tinners provides fast, efficient cleaning and re-tinning of blackened and highly oxidised soldering iron tips, safely and efficiently. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station. Minimal residues.

More information about Thermaltronics FBA_TMT-TC-2 #ad


Similar products:


Hakko T18-BR02 - R0.2 mm x 10.5 mm - T18 Series Soldering Tip for Hakko FX-888/FX-8801 - Conical - Bent 30?

#ad
American Hakko Products, Inc. T18-BR02 #ad - No-clean compatible formulation. Adjustable temperature control. Dimensions: bent 30 - R02 mm x 105 mm. Digital display shows °ree; f or °ree; c. Temperature range 120° - 899° f 50° - 480° c. Digital soldering station end safe version with Chp170 cutter. Minimal residues. Fx-888d kit version with CHP170 cutter.

Comes with fx-888d, a1559 sponge, a1561 cleaning wire, t18-d16 tip, fx-8801 soldering iron, fh800 iron holder, manual. Adjustable temperature control. Removes tip oxidation. Lead free RoHS Compliant. P2 digital soldering station end safe. Rapidly re-tins badly oxidised soldering iron tips. Shape: Conical.

More information about American Hakko Products, Inc. T18-BR02 #ad


Similar products:


Hakko FX888D-23BY, 599B-02 Soldering Station with 599B Tip Cleaner, Blue/Gold

#ad
American Hakko FX888D-23BY, 599B-02 #ad - The hakko fx-888d is an updated digital version of the popular analog fx-888 and includes several new features. Digital soldering station end safe. Digital soldering station end safe version with Chp170 cutter. User selectable preset temperatures and digital calibration simplify user setup and operation, and the new password protection and low temperature alarm provides process control and helps protect against cold solder joints.

Maintains idle temperature within 1. 8degree f 1degree c when set to 400 - 899Degree f 200 - 480Degree c. Lead free RoHS Compliant. Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery. Fx-888d kit version with CHP170 cutter. Rapidly re-tins badly oxidised soldering iron tips.

Hakko FX888D-23BY, 599B-02 Soldering Station with 599B Tip Cleaner, Blue/Gold #ad - Shape: Conical. Includes t18-d16 1. 6mm chisel tip. Comes with fx-888d, a1559 sponge, fh800 iron holder, t18-d16 tip, fx-8801 soldering iron, A1561 cleaning wire, manual. Adjustable temperature control. Removes tip oxidation.

More information about American Hakko FX888D-23BY, 599B-02 #ad


Similar products:


Hakko CHP-170 Micro Soft Wire Cutter, 1.5mm Stand-off, Flush Cut, 2.5mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 8mm Jaw Length, 16 Gauge Maximum Cutting Capacity

#ad
Quality Hand Tools CHP-170 #ad - Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Digital soldering station end safe version with Chp170 cutter. Adjustable temperature control range 120Degree - 899Degree f 50Degree - 480Degree c - shows either degree f or degree c.

The company, founded in 1984, is headquartered in Valencia, CA. Fx-888d kit version with CHP170 cutter. Minimal residues. Rapidly re-tins badly oxidised soldering iron tips. Shape: Conical. Nonslip hand grips provide comfort and control, and a dolphin-style curved fore-edge protects hands from cutting surfaces.

Hakko CHP-170 Micro Soft Wire Cutter, 1.5mm Stand-off, Flush Cut, 2.5mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 8mm Jaw Length, 16 Gauge Maximum Cutting Capacity #ad - Includes t18-d16 1. 6mm chisel tip. 21-degree reverse angled cutting surface enables terminal wires to be cut, leaving a 1. 5mm stand-off. Dimensions: bent 30 - R02 mm x 105 mm. The hakko chp 170 micro soft-wire cutter has an 8mm long jaw set at a 21-degree angle for flush-cutting terminal wires up to 16 gauge 1.

More information about Quality Hand Tools CHP-170 #ad


Similar products:


Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter

#ad
Kester 24-6337-0027 #ad - Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery. Comes with fx-888d, fh800 iron holder, a1559 sponge, A1561 cleaning wire, t18-d16 tip, fx-8801 soldering iron, manual. Adjustable temperature control. Lead free RoHS Compliant. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

Fx-888d kit version with CHP170 cutter. 0031 inch. Digital soldering station end safe. Dimensions: bent 30 - R02 mm x 105 mm. Per j-std-004b, " 44" is classified as Rom1 flux. Rosin" 44" is a high activity RA core flux designed for excellent instant wetting action, even on nickel surfaces. Removes tip oxidation. 21-degree reverse angled cutting surface enables terminal wires to be cut, leaving a 1.

Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter #ad - 5mm stand-off. Composition: 63 percent tin, 37 percent lead. Minimal residues.

More information about Kester 24-6337-0027 #ad


Similar products:


Hakko FS100-01 Tip Cleaning Paste 10 g for FT-700

#ad
Hakko FS100-01 #ad - Re-tins oxidized soldering iron tips and increases tip life. 0031 inch. Doesn't contain lead or di-ammonium phosphate. Composition: 63 percent tin, 37 percent lead. 21-degree reverse angled cutting surface enables terminal wires to be cut, leaving a 1. 5mm stand-off. Includes t18-d16 1. 6mm chisel tip. Free 599b-02 cleaning wire.

Adjustable temperature control. No-clean compatible formulation. Lead-free compound insures this item can be used on all soldering tips. Removes tip oxidation. Free of di-ammonium phosphate which shortens tip life. The hakko fs100-01 is lead free solder tip cleaning paste. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1.

Hakko FS100-01 Tip Cleaning Paste 10 g for FT-700 #ad - 3mm copper and soft wire. Digital soldering station end safe version with Chp170 cutter. Lead free RoHS Compliant. Combines with the ft-700 polisher for enhanced results. Maintains idle temperature within 1.

More information about Hakko FS100-01 #ad


Similar products:


NTE Electronics SW02-10 No-Clean Solder Wick, #4 Blue, .098" Width, 10' Length

#ad
NTE Electronics, Inc. SW02-10 #ad - Combines with the ft-700 polisher for enhanced results. Minimal residues. Re-tins oxidized soldering iron tips and increases tip life. Core size: 66. Free 599b-02 cleaning wire. 21-degree reverse angled cutting surface enables terminal wires to be cut, leaving a 1. 5mm stand-off. Nte solder wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption.

Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery. Temperature range 120° - 899° f 50° - 480° c. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Lead free RoHS Compliant. Available with standard or anti-static bobbins.

NTE Electronics SW02-10 No-Clean Solder Wick, #4 Blue, .098" Width, 10' Length #ad - Digital soldering station end safe. Rapidly re-tins badly oxidised soldering iron tips. Shape: Conical. Includes t18-d16 1. 6mm chisel tip. Adjustable temperature control.

More information about NTE Electronics, Inc. SW02-10 #ad


Similar products:


uxcell 10Pcs 50x60x10mm Cleaning Solder Sponge for Soldering Rework Station

#ad
uxcell US-SA-AJD-48463 #ad - Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Color : Gray. 2. 5mm heat-treated carbon steel construction provides durability and long life. Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery.

100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Packed of quality soldering iron sponge, approximately 50 x 60 x 10mm, 10 pcs in total. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Includes hakko 599b-02 solder tip cleaning wire and holder.

uxcell 10Pcs 50x60x10mm Cleaning Solder Sponge for Soldering Rework Station #ad - Rapidly re-tins badly oxidised soldering iron tips. Shape: Conical. Ideal to replace old worn out sponge. Re-tins oxidized soldering iron tips and increases tip life. Core size: 66. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance.

No-clean compatible formulation.

More information about uxcell US-SA-AJD-48463 #ad


Similar products: