Kester 83-1000-0186 Mildly Activated Rosin Liquid Flux Pen for Lead-Bearing and Lead Free Alloy, 0.33 fl. oz.

Use of this flux minimizes cleaning costs while complying with environmental regulations. Classified as orh1 per J-STD-004. This flux does not attack properly cured solder masks or FR-4 epoxy-glass laminate. Kester 2331-zx is not detrimental to the surface insulation resistance of the soldered assembly. No offensive odors will be emitted during soldering.

Ph neutral Chemistry. Kester 2331-zx will not create excessive foaming in standard water cleaning systems. Chemically compatible with most solder masks and board laminates. This popular flux has been used for soldering critical assemblies in the telecommunications, computer and other industries. Kester 2331-zx is an innovation in organic acid water-soluble flux chemistry for soldering circuit board assemblies.

High activity. This unique, neutral ph chemistry flux provides the best ionic cleanliness of any organic water-soluble flux available to the electronics industry. Kester 2331-zx has good soldering properties for improved productivity without sacrificing reliability of the assembly. Kester 2331-zx flux pen is designed for leaded and lead-free rework of conventional and surface mount circuit board assemblies.

.

---

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

Available with standard or anti-static bobbins. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

Nte solder wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption.


Similar products:

---

Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container

Lead free RoHS Compliant. Available with standard or anti-static bobbins. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station. Removes tip oxidation. No-clean compatible formulation. Minimal residues. Thermaltronics tmt-tc-2 tip tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid.

100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Rapidly re-tins badly oxidised soldering iron tips. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.

Thermaltronics tmt-tc-2 tip tinners provides fast, efficient cleaning and re-tinning of blackened and highly oxidized soldering iron tips, safely and efficiently.


Similar products:

---

Hakko 599B-02 Wire-type soldering iron tip cleaner

100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Removes tip oxidation. No water required. Will not reduce the tip temperature. Rapidly re-tins badly oxidised soldering iron tips.

. Cleans better than conventional sponges. Available with standard or anti-static bobbins. Lead free RoHS Compliant. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering. Does not cause premature wear of soldering iron tips. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.

Minimal residues. The hakko 599b-02 is a replacement solder tip cleaning wire sponge. No-clean compatible formulation. No contamination risk compared to conventional tip tinners. These sponges are hard enough to remove debris and some corrosion from the solder tips while being soft enough not to damage the tip.

.


Similar products:

---

Micro Cutter

Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Removes tip oxidation. 2. 5mm heat-treated carbon steel construction provides durability and long life. Cleans better than conventional sponges. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

Will not reduce the tip temperature. Does not cause premature wear of soldering iron tips. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.

No-clean compatible formulation. Available with standard or anti-static bobbins. Lead free RoHS Compliant. The hakko chp-170 cutter is an excellent general use tool. No contamination risk compared to conventional tip tinners. 21-degree. Rapidly re-tins badly oxidised soldering iron tips.


Similar products:

---

Kester 186 Rosin Soldering Flux 2oz Bottle, RMA No Clean Lead Free

High preheat temperatures does not degrade solubility of the residue in normal cleaning solvents. Minimal residues. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

Lead free RoHS Compliant. No water required. Kester186 under mil-f-14256, was QPL approved as Type RMA. The kester 186 flux pen is specifically designed for leaded and lead-free rework of conventional and surface mount circuit board assemblies. Eliminates the need and expense of cleaning. 2-ounce Bottle. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

Available with standard or anti-static bobbins. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. No-clean compatible formulation. 2.


Similar products:

---

Rosin Paste Flux #135 in a 2 oz Jar

This petroleum/rosin contains NO Zinc Chloride or Ammonium Chloride, making it a better choice for electronic repairs. No water required. 21-degree. High preheat temperatures does not degrade solubility of the residue in normal cleaning solvents. 2-ounce Bottle. Lead free RoHS Compliant. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

Removes tip oxidation. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Minimal residues. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

Cleans better than conventional sponges. Does not cause premature wear of soldering iron tips. Will not reduce the tip temperature. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. The ideal flux for electrical and electronic repairs.

No-clean compatible formulation.


Similar products:

---

Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter

Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Although" 44" is a ra-based material, the residues are non-corrosive If not cleaned. 2-ounce Bottle. Removes tip oxidation. 0031 inch. Will not reduce the tip temperature.

High preheat temperatures does not degrade solubility of the residue in normal cleaning solvents. Composition: 63 percent tin, 37 percent lead. Rosin" 44" is a high activity RA core flux designed for excellent instant wetting action, even on nickel surfaces. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Eliminates the need and expense of cleaning. Available with standard or anti-static bobbins. Lead free RoHS Compliant. Rapidly re-tins badly oxidised soldering iron tips. Contains 2 ounce in a "hockey Puck" jar.


Similar products:

---

KESTER SOLDER 32117 24-6040-0027 60/40 Stand, 0.031" Diameter,"44", 1.5"

Will not reduce the tip temperature. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire.

Minimal residues. 2-ounce Bottle. The ideal flux for electrical and electronic repairs. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance.

Does not cause premature wear of soldering iron tips. 21-degree. Contains 2 ounce in a "hockey Puck" jar. Eliminates the need and expense of cleaning. No water required. Cleans better than conventional sponges. Kester ""44"" 60/40 solder rosin ""44"" is a high activity ra Core Flux Designed For Excellent Instant Wetting Action, Even On Nickel Surfaces.

Rapidly re-tins badly oxidised soldering iron tips.


Similar products:

---

WYCTIN Diameter 0.6mm 100g 60/40 Active Solder Wire With Resin Core for Electrical Repair Soldering Purpose

Description/Function: Wire Solder. Alloy: tin 60%- Lead 40%. 0031 inch. High thermal stability for soldering multi-layer assemblies which require higher temperatures. Wire dia: 06mm00236inches, gross weight: 100gram/022lbs/3. 215ounces. Alloy: 60/40 60% tin, 40% Lead. Rapidly re-tins badly oxidised soldering iron tips.

Eliminates the need and expense of cleaning. Lower melting point: 361F/183C. Formulated for use with tin/lead and lead-free alloys. Cleans better than conventional sponges. Lead free RoHS Compliant. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

2-ounce Bottle. 2. 5mm heat-treated carbon steel construction provides durability and long life. Contains 2 ounce in a "hockey Puck" jar. Fine rosin Core Solder. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance.




Similar products:

---

MG Chemicals Desoldering Braid #1 Fine Braid Super Wick with RMA Flux, 5' Length x 0.025" Width , White

No-clean compatible formulation. Manufactured under SPC guidelines. Lead free RoHS Compliant. No contamination risk compared to conventional tip tinners. Improves soldering performance. Rohs compliant. Rapidly re-tins badly oxidised soldering iron tips. Oxide-free clean copper. Contains 2 ounce in a "hockey Puck" jar.

Alloy: 60/40 60% tin, 40% Lead. Alloy: tin 60%- Lead 40%. Any place you can put solder in, you can take it out with Super Wick. Nsf - nonfood compounds program Listed P1, Nsf Registration #144208. High preheat temperatures does not degrade solubility of the residue in normal cleaning solvents. Does not cause premature wear of soldering iron tips.

Application: diy, home improvement, Repairation of cable/TV/Radio/sterro/ Toys. Only pure type 'rma' rosin is used meeting the requirements of MIL-F-14256F ANSI/J-STD-0004. Static free bobbins. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

Available with standard or anti-static bobbins. No water required.


Similar products: