Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems

Kreg DDS - Kreg dds 3-Inch No. 2 square driver Bit and 6-Inch No. 2 square driver bit for kreg Pocket Hole Systems 3-inch and 6-Inch lengths offered. 6-inch length is easy to use. Drivers come in standard or hardened tip version. Deep 2 driver recess resists cam-out. 3-inch length is great in tight spots.

More information about Kreg DDS

Kreg Hex Shank Pocket-Hole Drill Bit

Kreg QUIK-BIT - The kreg hex shank pocket-hole drill Bit was designed and constructed with the same rigorous standards as our well-known standard round shank KJD drill bit. It features the same stepped bit design, the same high quality construction, but also features a new hex shank which increases hold strength and reduces slippage in the chuck.

Made specifically for Pocket-Screw Joinery. 1/4" hex shank works with any quick change chuck. Hex shank with power groove resists slippage. Specialized stepped bit drills guide hole for screw. High quiality hardened steel for longevity.

More information about Kreg QUIK-BIT


Similar products:


Kreg SML-C250-250 2-1/2-Inch #8 Coarse Washer-Head Pocket Hole Screws, 250-Pack

Kreg SML-C250-250 - Kreg sml-c250-250 2-1/2-inch #8 coarse washer-head pocket Hole Screws, 250-Pack Made specifically for Pocket-Screw Joinery. 1/4" hex shank works with any quick change chuck. Hex shank with power groove resists slippage. Specialized stepped bit drills guide hole for screw. High quiality hardened steel for longevity.

250 #8 coarse washer-head pocket hole screws. Great for softer materials like pine, plywood, particle board, MDF and melamine. Washer head seats flush in the bottom of the pocket, eliminating pull through. Maxi-loc washer heads; larger threads provide maximum holding power. 2-1/2-inch screw for joining 1-1/2-inch stock.

More information about Kreg SML-C250-250


Similar products:


Paint Grade Plugs

Kreg P-PNT - Hide or decorative accent your exposed pocket holes with these high-quality, trimmable, solid-wood plugs. Great for softer materials like pine, plywood, particle board, MDF and melamine. Washer head seats flush in the bottom of the pocket, eliminating pull through. For use with materials from 1/2"- to 1 1/2" Thick.

2-1/2-inch screw for joining 1-1/2-inch stock. 50-count bag. Plugs blend with wood even in high-vis applications. Maxi-loc washer heads; larger threads provide maximum holding power. Made specifically for Pocket-Screw Joinery. 1/4" hex shank works with any quick change chuck. Hex shank with power groove resists slippage.

Paint Grade Plugs - Specialized stepped bit drills guide hole for screw. High quiality hardened steel for longevity. 250 #8 coarse washer-head pocket hole screws. Made from quality doweling for solid joining. Installation is easy: simply glue into place and then sand or Trim flush. Cut to match the pocket's angle for minimal sanding.

More information about Kreg P-PNT


Similar products:


Kreg SML-C125-250 1-1/4" Coarse Thread Number 8 Zinc Coated Pocket Hole Screws 250 Count

Kreg Enterprises, Inc. SML-C125-250 - 2-1/2-inch screw for joining 1-1/2-inch stock. Cut to match the pocket's angle for minimal sanding. Self-tapping tip. Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Every one of those features is there to ensure that you get the best results possible.

Made from quality doweling for solid joining. Case hardened Steel. Smooth shank. Made specifically for Pocket-Screw Joinery. 1/4" hex shank works with any quick change chuck. Hex shank with power groove resists slippage. Specialized stepped bit drills guide hole for screw. High quiality hardened steel for longevity.

Kreg SML-C125-250 1-1/4" Coarse Thread Number 8 Zinc Coated Pocket Hole Screws 250 Count - 250 #8 coarse washer-head pocket hole screws. Maxi-loc washer heads; larger threads provide maximum holding power. Square drive. Plugs blend with wood even in high-vis applications. But don't be fooled: there's a lot of serious engineering built into them. 50-count bag. At first glance, a Kreg screw might not look much different from other wood screws.

More information about Kreg Enterprises, Inc. SML-C125-250


Similar products:


PANOVOS 2PCS1/4" Hex Shank Pocket Hole Drill Bit + 3/8"9.5mmReplacement Twist Step Drill Bit with Depth Stop Collar for Manual Pocket Hole Jig System drill guide Drill Tools Kit Accessories

PANOVO PANOVO - Cut to match the pocket's angle for minimal sanding. Made specifically for Pocket-Screw Joinery. Drilling jigs Accessory has made your projects that require joinery much simpler. Drill guide for pocket holes. Work well with the Manual Pocket Hole Jig Master System, or alone. Smooth shank. Large diameter creates flat-bottomed hole.

Drills easily into any kind of wood, and leaves a clean hole. Drill bit tools for use with pocket hole joinery and perfect replacement. Package includes:2 x pocket hole jig system drill. Maxi-loc washer heads; larger threads provide maximum holding power. Self-tapping tip. Square drive. 50-count bag. 1pc the diameter:3/8"9.

PANOVOS 2PCS1/4" Hex Shank Pocket Hole Drill Bit + 3/8"9.5mmReplacement Twist Step Drill Bit with Depth Stop Collar for Manual Pocket Hole Jig System drill guide Drill Tools Kit Accessories - 5mm, the shank is 1/4" hex 1pc The shank size:3/8"9. 5mm the 1/4" hex shank works with any quick change chuck. 2-1/2-inch screw for joining 1-1/2-inch stock. Case hardened Steel. Small tip includes clearance hole for screw shank.

More information about PANOVO PANOVO


Similar products:


2 1/2", 8 Coarse, Washer Head, 250 count - Kreg SML-C250B-250 Blue-Kote Weather Resistant Pocket Hole Screws

Kreg SML-C250B-250 - Flat-bottom head. Needle sharp point minimizes walking. Maxi-loc washer heads; larger threads provide maximum holding power. Self-tapping tip. Case hardened Steel. Performs 400% better in corrosion resistance than our old zinc-plated screws. Large maxi-loc head stops when it hits the bottom of the hole. Great for softer materials like pine, plywood, particle board, MDF and melamine.

Washer head seats flush in the bottom of the pocket, eliminating pull through. Great for outdoor applications. Small tip includes clearance hole for screw shank. Sharp edge of self-tapping tip drills a cleaner pilot hole. Plugs blend with wood even in high-vis applications. Kreg sml-c250b-250 blue-kote weather resistant pocket hole screws - 2 1/2", #8 Coarse, Washer Head, 250 count Made specifically for Pocket-Screw Joinery.

2 1/2", 8 Coarse, Washer Head, 250 count - Kreg SML-C250B-250 Blue-Kote Weather Resistant Pocket Hole Screws - 1/4" hex shank works with any quick change chuck. Hex shank with power groove resists slippage. Specialized stepped bit drills guide hole for screw. High quiality hardened steel for longevity. 250 #8 coarse washer-head pocket hole screws.

More information about Kreg SML-C250B-250


Similar products:


Kreg D6X2 6-Inch #2 Square Driver Bit for Kreg Pocket Hole Systems, 2 Pack

Kreg D6X2 - Versatile #2 square driver extension bits. Compatible with virtually any drill that accepts exchangeable bits. Made from quality doweling for solid joining. Package includes:2 x pocket hole jig system drill. 2-1/2-inch screw for joining 1-1/2-inch stock. Cut to match the pocket's angle for minimal sanding. Case hardened Steel.

Plugs blend with wood even in high-vis applications. 6 inches long. Great for softer materials like pine, plywood, particle board, MDF and melamine. Washer head seats flush in the bottom of the pocket, eliminating pull through. Maxi-loc washer heads; larger threads provide maximum holding power. Smooth shank. Flat-bottom head.

Kreg D6X2 6-Inch #2 Square Driver Bit for Kreg Pocket Hole Systems, 2 Pack - Sharp edge of self-tapping tip drills a cleaner pilot hole. Needle sharp point minimizes walking. 50-count bag. Large diameter creates flat-bottomed hole. Drills easily into any kind of wood, and leaves a clean hole. Drill bit tools for use with pocket hole joinery and perfect replacement.

More information about Kreg D6X2


Similar products:


Kreg #KJSC/D Depth Collar w/ Allen Wrench

Kreg Tool Company 397383 - Large maxi-loc head stops when it hits the bottom of the hole. Sharp edge of self-tapping tip drills a cleaner pilot hole. Versatile #2 square driver extension bits. Great for softer materials like pine, particle board, plywood, MDF and melamine. Washer head seats flush in the bottom of the pocket, eliminating pull through.

. Use with kreg K3 Master System. Provides the added length needed in certain drilling applications. Use with kreg K4 Pocket Hole System. Performs 400% better in corrosion resistance than our old zinc-plated screws. 6 inches long. Replacement stop collar. Cut to match the pocket's angle for minimal sanding. Made specifically for Pocket-Screw Joinery.

Kreg #KJSC/D Depth Collar w/ Allen Wrench - 1/4" hex shank works with any quick change chuck. Hex shank with power groove resists slippage. Specialized stepped bit drills guide hole for screw. High quiality hardened steel for longevity. 250 #8 coarse washer-head pocket hole screws. Case hardened Steel.

More information about Kreg Tool Company 397383


Similar products:


1-Inch, 8 Coarse, Washer-Head, 100ct - Kreg SML-C1-100 Pocket Screws

Kreg SML-C1 - 100 - Self-tapping tip. 1" screw for joining 1/2" stock. Great for softer materials like pine, plywood, particle board, MDF and melamine. Washer head seats flush in the bottom of the pocket, eliminating pull through. Made from quality doweling for solid joining. Great for softer materials like pine, particle board, plywood, MDF and melamine.

Washer head seats flushly in the bottom of the pocket, eliminating pull through. Large diameter creates flat-bottomed hole. Drills easily into any kind of wood, and leaves a clean hole. Drill bit tools for use with pocket hole joinery and perfect replacement. Plugs blend with wood even in high-vis applications.

1-Inch, 8 Coarse, Washer-Head, 100ct - Kreg SML-C1-100 Pocket Screws - Versatile #2 square driver extension bits. Replacement stop collar. Square drive. Compatible with virtually any drill that accepts exchangeable bits. 6 inches long. Flat-bottom head. Needle sharp point minimizes walking. Use with kreg K4 Pocket Hole System.

More information about Kreg SML-C1 - 100


Similar products:


Kreg KJD Replacement Twist Step Drill Bit for Kreg Manual-Pocket Hole Systems

Kreg KJD - Recommended for use with corded high-rpm drills. 50-count bag. Sharp edge of self-tapping tip drills a cleaner pilot hole. Compatible with virtually any drill that accepts exchangeable bits. Performs 400% better in corrosion resistance than our old zinc-plated screws. Great for softer materials like pine, particle board, plywood, MDF and melamine.

Washer head seats flushly in the bottom of the pocket, eliminating pull through. Plugs blend with wood even in high-vis applications. Self-tapping tip. Needle sharp point minimizes walking. Made from quality doweling for solid joining. Square drive. For Kreg jigs. Small tip includes clearance hole for screw shank. Use with kreg K3 Master System.

Kreg KJD Replacement Twist Step Drill Bit for Kreg Manual-Pocket Hole Systems - Great for softer materials like pine, plywood, particle board, MDF and melamine. Washer head seats flush in the bottom of the pocket, eliminating pull through. Provides the added length needed in certain drilling applications. Case hardened Steel.

More information about Kreg KJD


Similar products: