SRA #99-20 Rosin RMA Soldering Flux Pen – Refillable

#ad
SRA PEN_RMA #ad - Compatible with Lead and Lead-Free Solders. Suitable for automotive, computer, telecom. Flux conforms to ipc-ansi-j-stD-004, Type ROL1. For rework and touch-up of SMT, SMD, and through hole solder joints. Contains 10 ml of a mildly activated rosin flux, type RMA Superior fluxing ability with Instant wetting.

Contains 10 ml of a RMA Rosin Flux. Residues are Non-Corrosive and Non-Conductive. It is completely chloride-free. The flux is widely used in electronic applications requiring excellent soldering activity and yielding residues with high water-extractresistivities. If removal of the residue is needed then alcohol should be used.

SRA #99-20 Rosin RMA Soldering Flux Pen - Refillable #ad - This is the first environmentally friendly Flux Pen that can be refilled for a cost effective flux solution. This product is RoHS Compliant. Environmentally Friendly Refillable Pen.

More information about SRA PEN_RMA #ad

Hakko 599B-02 Solder Tip Cleaning Wire and Holder

#ad
American Hakko Products, Inc 599B-02 #ad - Does not cause premature wear of soldering iron tips. Cleans better than conventional sponges. The hakko 599b-02 is a replacement solder tip cleaning wire sponge. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering. No contamination risk compared to conventional tip tinners.

Will not reduce the tip temperature. No water required. These sponges are hard enough to remove debris and some corrosion from the solder tips while being soft enough not to damage the tip.

More information about American Hakko Products, Inc 599B-02 #ad


Similar products:


Thermaltronics TMT-TC-2 Lead Free Tip Tinner 20g in 0.8oz Container

#ad
Thermaltronics #ad - Lead free RoHS Compliant. Thermaltronics tmt-tc-2 tip tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. Cleans better than conventional sponges. Does not cause premature wear of soldering iron tips. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station.

No contamination risk compared to conventional tip tinners. Minimal residues. No-clean compatible formulation. Thermaltronics tmt-tc-2 tip tinners provides fast, efficient cleaning and re-tinning of blackened and highly oxidised soldering iron tips, safely and efficiently. Removes tip oxidation. Rapidly re-tins badly oxidised soldering iron tips.

Thermaltronics TMT-TC-2 Lead Free Tip Tinner 20g in 0.8oz Container #ad - No water required. Will not reduce the tip temperature.

More information about Thermaltronics #ad


Similar products:


SunString Solar Cell Tabbing Wire, 40 feet

#ad
SunString SSG-40 #ad - Melt temp: 190c / 375F. No-clean compatible formulation. Wire: 99. 99% copper coating: 60% tin, 40% lead solder Coating Thickness: 50 micron Thickness: 025 mm width: 1. 5 mm length: 40 feet melt temp: 190C / 375F Cleans better than conventional sponges. Sunstring tabbing wire is used to connect solar cells together to produce desired voltage and current configurations.

Removes tip oxidation. No contamination risk compared to conventional tip tinners. Our tabbing wire is made of 99. 99% pure, flat, copper ribbon coated with solder for superior solderability. No additional solder required. Will not reduce the tip temperature. Rapidly re-tins badly oxidised soldering iron tips. Solar cell Tabbing Wire.

SunString Solar Cell Tabbing Wire, 40 feet #ad - Lead free RoHS Compliant. No additional solder is required to attach SunString tabbing wire to your solar cells, however, fluxing joint connections is required for secure and permanent attachment. Low temperature melting coating is compatible with many types of soldering irons. 99.

More information about SunString SSG-40 #ad


Similar products:


Aven 17542 Desoldering Wick, 2.5mm Width, 5' Length

#ad
Aven Tools 17542 #ad - No-clean compatible formulation. No contamination risk compared to conventional tip tinners. 16g. Rapidly re-tins badly oxidised soldering iron tips. Solar cell Tabbing Wire. High quality desoldering braid with unique, no clean flux. 01"l x 5'L. Pure oxygen free copper wire. 06 oz. 99. 99% pure Copper. No additional solder required.

Unique no clean flux. Will not reduce the tip temperature. Melt temp: 190c / 375F. Removes tip oxidation. High quality desoldering braid. Cleans better than conventional sponges. Weight 06oz. Desoldering wick. Does not cause premature wear of soldering iron tips. Lead free RoHS Compliant. Minimal residues. Pure oxygen free copper wire.

More information about Aven Tools 17542 #ad


Similar products:


NTE Electronics SW02-10 No-Clean Solder Wick, #4 Blue, .098" Width, 10' Length

#ad
NTE Electronics, Inc. SW02-10 #ad - Will not reduce the tip temperature. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Minimal residues. No contamination risk compared to conventional tip tinners. Removes tip oxidation. No water required. No-clean compatible formulation. Does not cause premature wear of soldering iron tips.

Rapidly re-tins badly oxidised soldering iron tips. Solar cell Tabbing Wire. High quality desoldering braid. Weight 06oz. Melt temp: 190c / 375F. Pure oxygen free copper wire. Unique no clean flux. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.

NTE Electronics SW02-10 No-Clean Solder Wick, #4 Blue, .098" Width, 10' Length #ad - Lead free RoHS Compliant. 99. 99% pure Copper. No additional solder required. 0

More information about NTE Electronics, Inc. SW02-10 #ad


Similar products:


Hakko CHP-170 Micro Soft Wire Cutter, 1.5mm Stand-off, Flush Cut, 2.5mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 8mm Jaw Length, 16 Gauge Maximum Cutting Capacity

#ad
Quality Hand Tools CHP-170 #ad - Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Minimal residues. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. No water required.

The hakko chp 170 micro soft-wire cutter has an 8mm long jaw set at a 21-degree angle for flush-cutting terminal wires up to 16 gauge 1. 3mm. No-clean compatible formulation. The tool is constructed of 2. 5mm heat-treated carbon steel that provides durability and long life. Cleans better than conventional sponges.

Hakko CHP-170 Micro Soft Wire Cutter, 1.5mm Stand-off, Flush Cut, 2.5mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 8mm Jaw Length, 16 Gauge Maximum Cutting Capacity #ad - Nonslip hand grips provide comfort and control, and a dolphin-style curved fore-edge protects hands from cutting surfaces. Rapidly re-tins badly oxidised soldering iron tips. Solar cell Tabbing Wire. Parkerized surfaces prevent glare and increase corrosion resistance. American hakko Products manufactures soldering and desoldering tools.

Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1.

More information about Quality Hand Tools CHP-170 #ad


Similar products:


OMorc Desoldering Wick, Solder Braid 2.5mm Width, 1.5m Length & Solder Sucker - Desoldering Vacuum Pump Solder Removal Tool

#ad
OMorc USAE1-VTGEDS006AD-VD #ad - No clean flux, oxygen free copper wire. 2. 5mm heat-treated carbon steel construction provides durability and long life. The solder wick can help clean some residue flux and BGA thermal bonding pad too. Compact and lightweight. Available with standard or anti-static bobbins. How to use the desoldering pumpstep 1: press the plunger down until it is been locked and you will hear a click; Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid; Step 3: Move the tip of the pump next to the molten solder.

Get the solder off and replace them with newer ones, which it is very common when soldering, so this desoldering removal tool will be your perfect companion to suck the solder away effectively. Suck the solder Away EasilyThe solder sucker measures 7. 48”x079”, which will fit your hands perfectly no matter if you are left-handed or right-handed.

OMorc Desoldering Wick, Solder Braid 2.5mm Width, 1.5m Length & Solder Sucker - Desoldering Vacuum Pump Solder Removal Tool #ad - Minimal residues. No contamination risk compared to conventional tip tinners. Does not cause premature wear of soldering iron tips. The solder sucker has plastic backing to ensure stability. Unique no clean flux.

More information about OMorc USAE1-VTGEDS006AD-VD #ad


Similar products:


MG Chemicals No Clean Flux Paste, 10 ml Syringe

#ad
MG Chemicals 8341-10ML #ad - 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Rapidly re-tins badly oxidised soldering iron tips. Solar cell Tabbing Wire. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire.

The desoldering wick is 2. 5mm wide and 1. 5m in length. Cleans better than conventional sponges. Melt temp: 190c / 375F. Weight: 04oz. No-clean compatible formulation. A unique mixture of high grade synthetic resin and thixotropic agents designed specifically for use with high temperature lead free and conventional Sn/Pb alloys.

MG Chemicals No Clean Flux Paste, 10 ml Syringe #ad - 99. 99% pure Copper. Available with standard or anti-static bobbins. Instant wetting. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas. Pure oxygen free copper wire, no clean flux for easy to use.

More information about MG Chemicals 8341-10ML #ad


Similar products:


Aven 17010 Adjustable Circuit Board Holder

#ad
Aven 17010 #ad - With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas. Pure oxygen free copper wire, no clean flux for easy to use. No-clean compatible formulation. The solder sucker has plastic backing to ensure stability. Superior fluxing ability.

Does not cause premature wear of soldering iron tips. The base of this rigid metal stand features four rubber feet to ensure stability. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. No contamination risk compared to conventional tip tinners. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.

Aven 17010 Adjustable Circuit Board Holder #ad - Weight: 04oz. Instant wetting. Retractable to accommodate various board sizes up to 198mm wide and up to 4mm thick. Cleans better than conventional sponges. Weight 06oz.

More information about Aven 17010 #ad


Similar products:


SE MZ101B Helping Hand with Magnifying Glass

#ad
SE MZ101B #ad - 21-degree reverse angled cutting surface enables terminal wires to be cut, leaving a 1. 5mm stand-off. 2. 5mm heat-treated carbon steel construction provides durability and long life. Clamps allow PCB to rotate 360 degrees. Se is committed to providing the customer with the best source for value. Rapidly re-tins badly oxidised soldering iron tips.

Solar cell Tabbing Wire. Heavy-duty base for stability. The magnifier and clips will adjust to most angles, and the magnifier greatly reduces the need for extra visual aid. No-clean compatible formulation. Thixotropic paste; RoHS compliant. The solder wick can help clean some residue flux and BGA thermal bonding pad too.

SE MZ101B Helping Hand with Magnifying Glass #ad - Compact and lightweight. Rubber feet of the base ensure stability. Top-notch quality. Retractable to accommodate various board sizes up to 198mm wide and up to 4mm thick. High quality desoldering braid. Lead free RoHS Compliant. 99.

More information about SE MZ101B #ad


Similar products: