As an Amazon Associate I earn from qualifying purchases.
1. Kegco #ad
Standard & 5lb co2 Tank- New Aluminum Cylinder with CGA320 Valve, 1 Faucet Without Tank, Kegco BF SHCK-NT Conversion Kit #adKegco #ad
- Cylinder with valve, shipped empty, high strength aluminum alloy 6061-T6;. At present we do not ship to california. Kegco premium Pro series double gauge Co2 regulator. 5. 25 inch diameter, 14. 2 inch length, 1.
125" unf inlet thread. Please note: beverage factory is the only reseller of genuine Kegco products on. Complete ball lock tap coupler set. 4-1/8" long beer shank with nipple assembly/ Chrome PLATED beer faucet with Brass lever. 5 lb capacity, 1800 psi, dot-3al & tC-3ALM designed.
2. Kegco #ad
Kegco EBDHCK2-5T Deluxe Homebrew Two Tap Door Mount Kegerator Conversion Kit with 5 lb. Aluminum CO2 Tank #adKegco #ad
- Durably constructed to deliver a consistent flow pour after pour, the dual gauge regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. This kit comes with two sets of ball lock keg couplers that each include both a gas in and a beer out coupler to allow you to easily tap Cornelius Pepsi home brew kegs.
Aluminum co2 tank made from high strength aluminum alloy with a glossy red coating that acts as an extra layer of protection against corrosion and wear.
The 10" wide door mounted drip tray features a clean design and reliable stainless steel construction, and it can be easily installed using the two conveniently placed screw holes on the backsplash.
Includes a brand new empty 5 lb. The two nsf-approved beer faucets feature forged brass bodies with highly polished chrome finishes, brass shaft assemblies and levers with non-stick ball washers, and black ABS plastic faucet knobs.
|Manufacturer||Beverage Factory #ad|
3. Kegco #ad
Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard #adKegco #ad
- Lever handle keg coupler: this nsf-approved kegco kt85d-l "d" system keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
The standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve. The lever-handle design is easy to use; simply pull out and then down on the handle to couple the keg. Single faucet draft beer tower: featuring a beautiful standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators.
Pro series dual gauge regulator: easily measure psi and co2 volume and adjust co2 output pressure using this kegco 542 Pro Series Double Gauge Regulator packed with premium features. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and four screws for easy mounting.
Includes empty 5 lb. Aluminum co2 tank: all of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. Standard metal beer faucet wrench: this beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets.
|Part Number||BF STCK-5T|
4. Kegco #ad
Kegco K199B-1 Keg Dispenser #adKegco #ad
- The sankey keg coupler is designed to fit most of your favorite domestic "D" system beer kegs. Two removable wire shelves give you the option to easily convert this beer fridge into an all-refrigerator or beverage center for extra refrigerated storage. Large interior: within the 33" h x 20" w x 25-1/2" d cabinet, straight pony, strap handle, the spacious interior will hold one full size, or quarter slim keg and up to two sixth slim, or rubber home brew kegs will not fit bevel or rubber kegs that are wider in the middle than at the top or bottom.
Includes complete "d" system keg tapping kit: this kegco k199 kegerator has all of the necessary equipment you'll need to dispense cold draft beer straight from the keg, 5 lb.
Powerful and energy efficient cooling technology: these keg coolers have been designed for in home use, and their quiet performance and energy-efficient design makes them even better for storing kegs in your home than some other beer coolers. It features a steel interior floor mat that helps evenly distribute the weight of your kegs and allows them to glide smoothly in and out of the cabinet when loading and unloading.
Long-lasting durability: this durable ul-listed keg dispenser has been designed to ensure long-lasting performance, so you'll be using it to dispense refreshing cold draft beer for a long time to come. The co2 cylinder ships empty and does not come filled, so you will need to get it filled locally. To help minimize mess, the textured serving counter-top features a removable drip tray that collects spills and an attractive metal guard rail that helps prevent beer mugs and glasses from sliding off. Aluminum co2 tank, including a 15" chrome plated draft beer tower, sankey keg coupler, and double gauge regulator.
5. Kegco #ad
Kegco HBK309B-2K Full-Size Digital Homebrew Kegerator Dual Faucet Black with Ball Lock Keg #adKegco #ad
- Product dimensions – 25” d x 24” w x 33. 25” h | electrical – 115v / one slim 1/4 / 60 Hz / two 1/6 or three 5 gallon ball / 1.7 running amps | fits barrels – one full size 1/2 / One Pony size 1/4 / pin lock Keg.
Features a reversible door | removable guardrail | Includes Keg dispenser / Gas and Beer lines / Co2 tank ships empty / regulator / One ball lock keg. Recommended clearance around the unit – 3” on all sides | Do not expose outdoor | Temperature range – 32ᵒ to 75ᵒ.
This keg refrigerator can even be used to store food and other beverages! With a digital led display and intuitive controls, it is easy to set and verify the internal temperature of this home brew keg refrigerator | Simply press the up or down button, and the temperature is adjusted by one degree in Fahrenheit or Celsius.
Store up to three cornelius ball lock kegs in the hbk309S-2's spacious interior, or use it to hold a 6 gallon bucket or carboy of fermenting homebrew.
6. Farwind #ad
CO2 Tank Adapter Convert Paintball Tank Canister To Soda Machine CO2 cylinder tank Compatible with SodaStream #adFarwind #ad
- Convert g1/2 interface to TR21-4. With this adapter you can replace the SodaStream CO2 tank with a standard paintball CO2 tank. Easy gas refilling and access at any local sporting store, save your money from spending on the expensive Sodastream tank.
Including the L wrench for adjusting the center pin if needed. Made of solid brass.
7. Kegco #ad
Kegco Kegerator, Stainless Steel, Single Tap #adKegco #ad
- Measures 35-7/8" h x 24-3/8" w x 24" D. Holds 1 full size, 3 ball lock kegs, or quarter slim keg, pony, 2 five gallon commercial kegs, or 2 pin lock kegs. Kegco's sanitary 100% stainless steel contact components do not contain lead and will not corrode.
Can be set between 32 and 75 degrees Fahrenheit - the widest temperature range on the market. Csa certified to conform to nSF/ANSI 7, making it suitable for both commercial and residential use.
8. Kegco #ad
Kegco K199B-2P Kegerator Two Keg Beer Cooler, Premium Double Faucet D System Kit, Black Door #adKegco #ad
- This premium kit also comes with a deluxe hand pump pressurized cleaning kit that makes it easy to keep your dispense system squeaky clean between kegs. Powerful and energy efficient cooling technology: designed to be ideal for in-home keg storage, this beer cooler features an ultra-quiet performance and a 25% more energy efficient design that delivers superior cooling while saving you money each month on your electricity bill.
100% stainless steel contact: the premium direct draw kit that is included with this unit features 100% stainless steel contact, the faucets, the tower shanks, ensuring that your beer will only touch sanitary stainless steel components from the keg to your glass! The probe on the keg couplers, and all of the fittings are stainless steel.
Draft beer line assembly with snap clamps, you get everything you need to begin dispensing delicious draft beer straight from a keg. Two removable wire shelves are included that allow you to easily convert this keg refrigerator into an all-refrigerator or beverage center for additional cold storage when you're not dispensing kegs.
The two tap dispense system includes a brand new 5 lb. The unit also features a textured countertop with an attractive metal safety rail that helps keep your mugs and glasses from sliding off, as well as an easy-to-clean removable drip tray that collects spills for fast clean-up. You can adjust the internal temperature between 34 and 45 degrees Fahrenheit using the temperature control dial conveniently located inside of the cabinet to store your kegs at their perfect temperature. Unit measures 33" h x 20" W x 25. 5" d.
|Manufacturer||Beverage Factory #ad|
9. Kegco #ad
Kegco HBK199B-2 Keg Dispenser #adKegco #ad
- It comes with two adjustable shelves that can be placed far enough apart to hold two liter bottles or gallon jugs. Includes complete keg tapping kit: this kegerator comes with a direct draft kit that has been completely outfitted with everything you will need to begin dispensing your homebrew beer from a keg - you just provide the keg of beer! This kit includes the premium versions of our polished stainless steel dual faucet draft beer tower, and 5 lb.
Sleek and stylish design: this kegerator's black cabinet is fitted with a matte black door that is not only stylish, but is also less prone to show fingerprints and smudges. Large interior: store and dispense from up to two 5-gallon home-brew kegs at the same time thanks to this kegerator's spacious interior, which allows you to have a variety of beers on tap for your friends and family.
Please note: this is a homebrew kegerator and includes ball lock keg couplers for home brew kegs; it will not tap commercial D system kegs.
The temperature can be adjusted using a mechanical dial that is conveniently located inside of the cabinet. Cleaning your kegerator is easier than ever thanks to the removable and dishwasher-safe drip tray that catches drips and spills for fast clean-up, as well as the chrome guard rail that keeps mugs and glasses from falling off of the top. Powerful and energy efficient cooling technology: this keg cooler features a 25% more energy efficient design that delivers powerful cooling while causing minimal impact to the environment - and your wallet. Four rolling casters provide convenient mobility.
10. Trinity #ad
Trinity soda maker external large co2 cga-320 tank system adapter and hose 60 long stainless steel soda water seltzer water carbonated water sparkle water hose adapter. #adTrinity #ad
- Fast 1-3 days shipping with tracking number. No hassle Return Policy. With our adapter you can use a large Beverage Co2 tank in your soda maker machine for instant savings in refills. Easy to use- easy to install-VIDEO AVAILABLE.
Buy with Confidence from Authorized Dealer. Brand New. Features a 60" stainless steel hosE for an easy installation and removal. Technical help available monday thru friday From 9am to 5pm pacific time From Trinity Supply Inc/818-558-6510 .