VINCA DCLA-0605 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-6 Inch/150 mm Stainless Steel Body Red/Black Extra Large LCD Screen Auto Off Featured Measuring Tool

The measuring Range is 0-6 inch/150mm. Please note that in order to obtain a more accurate measuring result, please use a small piece of paper or paper card to clean the external jaws everytime before using! vinca dcla-0605 digital caliper has auto-off function and it takes 5-7 mins to SHUT OFF. The max measuring Speed that allowed is 120" per second.

Higher quality lower price stainless steel digital caliper with inch/metric/fraction conversion. For more information please follow us on Instagram @officialclockwisetoolsinc. The resolution is 00005"/001mm, 1/128". It has a large lcd screen 13mm x 38mm in Inch/Metric/Fractions conversion. Vinca dcla-0605 digital caliper is a higher quality and lower price digital caliper.

Measure range: 0-6 inches/150mm. It is highly recomended for home DIY using as well as professional using. Its accuracy is ±0001"/002mm and Repeatability is 0

---

VINCA SSRA-12 Stainless Steel Office Drawing Ruler 0-12 Inch 0-30cm with Conversion Table Measuring Tool

Measuring range: 0-12"/30cm. 0cr13 hardened stainless steel for long lasting use. Etched finished with 1/16 graduation. Its measuring range is 0-12 inch/30cm and etched finished with 1/16 graduation. Metric and imperial measurement; Back side has conversion table. For more information please follow us on Instagram @officialclockwisetoolsinc.

. The material type is 0Cr13 hardened stainless steel and durable enough for long lasting use. Vinca ssra-12 stainless steel ruler is highly recomended for home DIY using as well as professional using. Ideal for marking, measuring, picture frame matting. Vinca ssra-12 designed as metric and imperial 2-way measurement, and it comes with a conversion table at backside.

Vinca ssra-12 has 1 year warranty.


Similar products:

---

GemRed 82305 Digital Angle Finder 7-Inch Protractor 200mm Stainless Steel Angle Finder Ruler

Total length 400mm. Gemred 2in1 angle finder Measuring range: 0-12"/30cm. Ideal for marking, measuring, picture frame matting. Locking screw for holding any angle. Working more than 2000 hours with one piece of CR2032 coin batteryincluded. Ruler and protractor combination for easy measuring. Durable stainless steel body provide years' using.

0cr13 hardened stainless steel for long lasting use. Great gift for Father's Day. Accuracy ±03°; resolution 01°. Etched finished with 1/16 graduation. Metric and imperial measurement; Back side has conversion table. Applied for defferent fields. Quick and clear digital readout. Zeroing at any angle for relative measuring.

.


Similar products:

---

Reese Towpower 74642 Brakeman Timed Compact Brake Control

For use on 12 volt negative ground systems only. For 2 and 4 brake systems. Metric and imperial measurement; Back side has conversion table. Measuring range: 0-12"/30cm. The brakeman timed Compact Brake Control is designed for single and tandem axle trailers. The time-based brake controls apply braking power at a fixed rate that is NOT proportional to the pressure applied to the brake pedal.

Locking screw for holding any angle. Working more than 2000 hours with one piece of CR2032 coin batteryincluded. Completely compatible with anti-lock braking systems. Time-based brake controls generate an output signal that increases over a period of time Ramp Cycle. This brake control features a unique “sync” adjustment for towing different trailers, fingertip output controls and a soft touch variable manual control.

Reese towpower brake controls are 100% "solid-state electronic. Models are designed for use with one to four axle systems. Durable stainless steel body provide years' using. Ideal for marking, measuring, picture frame matting. Made of 100% solid state construction, this item has no moving parts or pendulums, no hydraulic connections and no leveling is required.

Slide adjustment.


Similar products:

---

HATCHBOX 3D PLA-1KG1.75-WHT PLA 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, White

For 2 and 4 brake systems. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. Blending a mixture of plant-based materials and polymers creates HATHCHBOX 3D Printer's PLA, making this material more earth-friendly.

Ruler and protractor combination for easy measuring. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Measuring range: 0-12"/30cm. 1. 75mm filament diameter Dimensional Accuracy +/- 005mm. Etched finished with 1/16 graduation. Metric and imperial measurement; Back side has conversion table.

Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints. Slide adjustment. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Great gift for Father's Day.


Similar products:

---

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Currently work with the Anet A8. Specifications: dimensions: 60*50mm net weight: 25g color:black max current: 25aenhance heat dissipation helps 3d printer equipped with the controller board capable of max 15A become more powerful With this add-on module to board lead the maximum current up to 25A If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board, please choose the appropriate power supply, According to the thermal power of the bed, with sufficient margin.

General add-on heated bed power expansion module. Slide adjustment. Applied for defferent fields. Quick and clear digital readout. Zeroing at any angle for relative measuring. Etched finished with 1/16 graduation. Great gift for Father's Day. Accuracy ±03°; resolution 01°. If it is large power heated, under the same power requirements, if there have any issue please contact us before leave negative review and feedback, current is less than 12 v Package Included: 1*Heat bed Power Module Note: Please double-confirm the wire you connect is right, we suggest 24V power supply, thanks! Measuring range: 0-12"/30cm.




Similar products:

---

3D Print Removal Tool

If you have been tramming leveling your heated print bed with a piece of paper, your fingers will thank you! The thicker neck is useful for removing rafts and for trimming off supports. General add-on heated bed power expansion module. If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print.

Etched finished with 1/16 graduation. If you are left-handed and starting from the left, twist the tool clockwise. If you cannot get the blade under the print to start, bring the left edge of the tool against a right-side corner of the print and twist the handle clockwise. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant.

Tilting or twisting the blade slightly will help speed up the lifting of the print. If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. Locking screw for holding any angle. Working more than 2000 hours with one piece of CR2032 coin batteryincluded.

Completely compatible with anti-lock braking systems. Red indicator light. Great gift for Father's Day.


Similar products:

---

HATCHBOX 3D PLA-1KG1.75-GRN PLA 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Green

Great gift for Father's Day. Accuracy ±03°; resolution 01°. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". With this addon module to your 3D printer motherboard you can lead the maximum current up to 25A. Metric and imperial measurement; Back side has conversion table.

Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Applied for defferent fields. Quick and clear digital readout. Zeroing at any angle for relative measuring. For 2 and 4 brake systems. Ideal for marking, measuring, picture frame matting. Total length 400mm. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant.

No moving parts and no leveling required. Blending a mixture of plant-based materials and polymers creates HATHCHBOX 3D Printer's PLA, making this material more earth-friendly. 1. 75mm filament diameter Dimensional Accuracy +/- 0


Similar products:

---

IRWIN Combination Square, Metal-Body, 12", 1794469

Black precision-etched scales. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Rounded edge is safer and less likely to tear print bed tape. Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic. An essential addition to your 3D Printer Tool Kit.

120-mm long flexible blade helps to reach underneath large prints. Completely solve the hot bed power is too large and the load current issue. Metric and imperial measurement; Back side has conversion table. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Ideal for marking, measuring, picture frame matting.

0cr13 hardened stainless steel for long lasting use. Perfect for 90° and 45° marking. Etched finished with 1/16 graduation. Ruler and protractor combination for easy measuring. 1 kg approximately 2. 20 lbs Spool. Measuring range: 0-12"/30cm. 1.


Similar products:

---

400mm x 205mm x 0.5mm Silicone Thermal Pad for CPU GPU Heatsink

With this addon module to your 3D printer motherboard you can lead the maximum current up to 25A. 1 kg approximately 2. 20 lbs Spool. Rounded edge is safer and less likely to tear print bed tape. Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic. An essential addition to your 3D Printer Tool Kit.

120-mm long flexible blade helps to reach underneath large prints. Used for graphics cards, graphic chips and CPU chips. The thermal pad can lower greatly CPU temperature and solve most of the laptop heatsink problem. No moving parts and no leveling required. Metric and imperial measurement; Back side has conversion table.

Slide adjustment. For 2 and 4 brake systems. Package content : 1 x cpU Thermal Pad. Under the premise of normal cooling, it work stable under IMax=25A, the current must not exceed 25A while the process working. Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 1. 25".


Similar products:

---

Quick-n-EZ Impact Bullet Puller

Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". It is as easy as that. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Works with practically every caliber from 22 Hornet to 45-70 Ruler and protractor combination for easy measuring. Etched finished with 1/16 graduation.

Applied for defferent fields. Quick and clear digital readout. Zeroing at any angle for relative measuring. 0cr13 hardened stainless steel for long lasting use. Locking screw for holding any angle. Working more than 2000 hours with one piece of CR2032 coin batteryincluded. Completely compatible with anti-lock braking systems.

Completely solve the hot bed power is too large and the load current issue. Product name : cpu Thermal Pad;Material : Silicone. Durable cast zinc body. Rust proof stainless steel blade. 1. 75mm filament diameter Dimensional Accuracy +/- 0


Similar products: