ZING 7069 RecycLock Safety Padlock, Keyed Alike,1-1/2″ Shackle, 1-3/4″ Body, Yellow, 6 Pack

The security level of a safety padlock is measured more by the number of key codes also called key changes or key cuts it can offer than by its ability to withstand physical abuse. Keyed alike locks allow one user to open many padlocks with one key. Zing green products manufactures environmental signs and safety equipment from recycled materials.

Lockout/tagout loto safety procedures require that lockout devices meet Occupational Safety and Health Administration OSHA 1910147c5 standards for quality assurance. Vertical shackle clearance is the distance from the top of the lock body to the farthest point on the inside of the shackle. The zing recyclock lockout/tagout padlock, made from 70% recycled materials, has a solid aluminum body and steel shackle covered with plastic for corrosion resistance; retains its key until locked to ensure it is not left unlocked; and has a keyed alike 6-pin tumbler cylinder for security with single key convenience for use with multiple locks.

Master keyed locks can be opened if the original key is lost or unavailable during an emergency. Safety padlocks, also called lockout padlocks, use colors or warning labels to help prevent machine operation or power activation during maintenance and repair. A padlock with more pin tumblers and higher precision key cylinders has more key codes available, making it harder to pick, and less likely for a large facility to inadvertently give two employees padlocks with the same key code.

Keyed alike 6-pin tumbler cylinder for security with single key convenience for multiple locks. This padlock is part of a lockout/tagout LOTO safety procedure required at facilities where a device or energy source needs to be isolated during maintenance and repair.

Master Lock 421 Lockout Hasp with Vinyl Coated Handle, 1-1/2" Inside Jaw Diameter

Heavy gauge steel resists prying. 3, 410, 411 and 6835 safety lockout padlocks. Compatible with no. Heavy gauge 1/16" steel jaw is zinc plated to resist corrosion, and fits into holes 5/16" or larger. Allows for lockout by up to six workers. Hasp locking holes accommodate padlock shackles up to 9/32" outside diameter.

Limited lifetime warranty. Six holes for padlocks sold separately provide the ability to require multiple authorizations to allow access to one locked out device or energy source. Non-conductive, red vinyl handle coating improves grip and protects equipment from scratching.


Similar products:
Wordlock PL-004-BK 5-Dial Combination Padlock, Black
Master Lock 1500iD Speed Dial Combination Lock, Assorted Colors
Findway 5 UV Ultra Violet Blacklight 9 LED Flashlight Torch Light Outdoors
Master Lock 410GRN Green 410 Zenex Safety Padlock with Short Body, 1/4" x 1-1/2" Shackle (Pack of 1)
Brady 123143 Red Compact Lock Personal Kit, Red
Set of 3 Invisible UV Blacklight Ink Marker Blue Red Yellow
NMC LOTAG36-25 Lockout Tag, "DANGER - DO NOT OPERATE," 6" Height x 3" Width, Unrippable Vinyl, Red/Black on White (Pack of 25)
Wordlock PL-003-SL 5-Dial Combination Padlock, Silver
Master Lock 140D Solid Brass Keyed Different Padlock with 1-9/16-Inch Wide Body, 1/4-Inch Shackle
Master Lock Grip Tight Circuit Breaker Lockout, Oversized Toggle


NMC LOTAG36-25 Lockout Tag, "DANGER - DO NOT OPERATE," 6" Height x 3" Width, Unrippable Vinyl, Red/Black on White Pack of 25

Front of tag reads, "do not operate - this lock/tag may only be removed by:" followed by two blank lined areas labeled "Name, " "dept, " and "Expected Completion". Red, white, and black "Danger" logo and diagonal red and white stripes on both sides for high visibility. Heavy gauge 1/16" steel jaw is zinc plated to resist corrosion, and fits into holes 5/16" or larger.

The nmc lotag36-25 lockout tag is made of 15 mil vinyl for water and chemical resistance, and has a red, white, and black "Danger" logo and diagonal red and white stripes on both sides for high visibility. Tensile strength of 6, 300 psi to help resist unauthorized removal. National marker Company manufactures signs and safety information products.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right. Lockout/tagout loto safety procedures require that tagout devices meet Occupational Safety and Health Administration OSHA 1910147c5 standards for quality assurance. Hasp locking holes accommodate padlock shackles up to 9/32" outside diameter.

Lockout tags also called safety tags use color and warning text to help prevent machine operation or power activation during maintenance and repair. Six holes for padlocks sold separately provide the ability to require multiple authorizations to allow access to one locked out device or energy source.


Similar products:
Master Lock 410GRN Green 410 Zenex Safety Padlock with Short Body, 1/4" x 1-1/2" Shackle (Pack of 1)
Master Lock 421 Lockout Hasp with Vinyl Coated Handle, 1-1/2" Inside Jaw Diameter
Master Lock Standard Group Lock Box for Lockout/Tagout
Master Lock 420 Lockout Hasp with Vinyl Coated Handle, 1" Inside Jaw Diameter
Master Lock Grip Tight Circuit Breaker Lockout, Oversized Toggle
MASTER LOCK COMPANY, Government Safety Lockout Padlock, Zenex, 1 1/2", Red, 1 Key, 6/Box
Master Lock 410KARED Keyed-Alike Safety Lockout Padlock, Red
Master Lock Grip Tight Circuit Breaker Lockout, Standard Toggle
Master Lock Rotating Electrical Plug Lockout
MASTERLOCK 1457E410KA Master Lock Personal Lockout Kit Electrical


Accuform Signs MLT406CTP Lockout Tag, Legend "DANGER DO NOT OPERATE", 5.75" Length x 3.25" Width x 0.010" Thickness, PF-Cardstock, Red/Black on White Pack of 25

Tear-resistant, distort, waterproof, and will not crack, or shrink. Scuff-resistant, matte surface is easy to write on with pen or marker. Tensile strength of 6, 300 psi to help resist unauthorized removal. Thin and flexible 10-mil poly-based material contains no wood-based, paper content, and is more durable than traditional cardstock.

Hasp locking holes accommodate padlock shackles up to 9/32" outside diameter. Accuform signs pulp-free pf-cardstock tags are more durable than traditional cardstock, distort, and will not crack, or shrink. Complies with osha 29 cfR 1910147 requirements. Prevent the accidental or unexpected start up or release of stored energy when working on equipment and machinery with thin and flexible 10-mil PF-Cardstock tags for indoor and short-term outdoor use.

The matte surface is scuff-resistant and easy to write on with pen or marker. Top has 3/8" plain hole. 6 x 3" tag includes 3/8" diameter hole for fastening and reinforced brass grommet for longer wear. 15 mil vinyl is water and chemical resistant. Non-conductive, red vinyl handle coating improves grip and protects equipment from scratching.

Front of tag reads, " "dept, "do not operate - this lock/tag may only be removed by:" followed by two blank lined areas labeled "Name, " and "Expected Completion".


Similar products:
Master Lock 410GRN Green 410 Zenex Safety Padlock with Short Body, 1/4" x 1-1/2" Shackle (Pack of 1)
Master Lock 410KARED Keyed-Alike Safety Lockout Padlock, Red
Master Lock 421 Lockout Hasp with Vinyl Coated Handle, 1-1/2" Inside Jaw Diameter
Master Lock Grip Tight Circuit Breaker Lockout, Standard Toggle
Master Lock 420 Lockout Hasp with Vinyl Coated Handle, 1" Inside Jaw Diameter
Master Lock Standard Group Lock Box for Lockout/Tagout
Master Lock Rotating Electrical Plug Lockout
Master Lock Grip Tight Circuit Breaker Lockout, Oversized Toggle
Brady Laminated Lockout Safety Poster
ZING 7065 RecycLock Safety Padlock, Keyed Alike,1-1/2" Shackle, 1-3/4" Body, Blue, 6 Pack


Master Lock 420 Lockout Hasp with Vinyl Coated Handle, 1" Inside Jaw Diameter

Lockout Tagout. Limited lifetime warranty. Hasp locking holes accommodate padlock shackles up to 9/32" outside diameter. Six holes for padlocks sold separately provide the ability to require multiple authorizations to allow access to one locked out device or energy source. Tear-resistant, waterproof, distort, and will not crack, or shrink.

Scuff-resistant, matte surface is easy to write on with pen or marker. Heavy gauge 1/16" steel jaw is zinc plated to resist corrosion, and fits into holes 5/16" or larger. Heavy gauge 1/16" steel jaw is zinc plated to resist corrosion, and fits into holes 5/16" or larger. Complies with osha 29 cfR 1910147 requirements.

The product is manufactured in china. 6 x 3" tag includes 3/8" diameter hole for fastening and reinforced brass grommet for longer wear. Top has 3/8" plain hole. Front of tag reads, "do not operate - this lock/tag may only be removed by:" followed by two blank lined areas labeled "Name, " "dept, " and "Expected Completion".

Red, white, and black "Danger" logo and diagonal red and white stripes on both sides for high visibility. Six holes for padlocks sold separately provide the ability to require multiple authorizations to allow access to one locked out device or energy source.


Similar products:
Master Lock 1500iD Speed Dial Combination Lock, Assorted Colors
Wordlock PL-004-BK 5-Dial Combination Padlock, Black
Findway 5 UV Ultra Violet Blacklight 9 LED Flashlight Torch Light Outdoors
Set of 3 Invisible UV Blacklight Ink Marker Blue Red Yellow
Wordlock PL-003-SL 5-Dial Combination Padlock, Silver
Master Lock 1535DWD Vertical Resettable Word Combo Lock, Assorted Colors (Pack of 1)
Master Lock 646T Set-Your-Own Combination Luggage Lock, 11/16-inch, 2-Pack
Master Lock 140D Solid Brass Keyed Different Padlock with 1-9/16-Inch Wide Body, 1/4-Inch Shackle
Wordlock 5-Dial Padlock, 63mm, Blue
Stack-On GMR-13 13-Inch Multi-Purpose Handy Storage Box with Tote Tray, Red


Accuform Signs MLT400CTP Lockout Tag, Legend "DANGER DO NOT OPERATE", 5.75" Length x 3.25" Width x 0.010" Thickness, PF-Cardstock, Red/ Black on White Pack of 25

Hasp locking holes accommodate padlock shackles up to 9/32" outside diameter. Hasp locking holes accommodate padlock shackles up to 9/32" outside diameter. Accuform is widely considered the leading facility safety identification manufacturer in North America and beyond. Top has 3/8" plain hole. The matte surface is scuff-resistant and easy to write on with pen or marker.

Lockout Tagout. Tear-resistant, waterproof, distort, and will not crack, or shrink. Scuff-resistant, matte surface is easy to write on with pen or marker. Limited lifetime warranty. Tensile strength of 6, 300 psi to help resist unauthorized removal. Our products include almost every type of safety sign, tag, and label, as well as an extensive line of Lockout/Tagout products.

Accuform signs pulp-free pf-cardstock tags are more durable than traditional cardstock, and will not crack, distort, or shrink. Heavy gauge 1/16" steel jaw is zinc plated to resist corrosion, and fits into holes 5/16" or larger. For nearly 40 years, and distribution strategies to deliver world-class visual communications to the workplace that protect, Accuform Signs, has continuously perfected and improved sign, Florida, inform, safety procedures, headquartered in Brooksville, environmental compliance, tag and label manufacturing processes, and motivate the global workforce.

Accuform continues to work hard to further build a reputation of quality, flexibility, convenience, industry knowledge, and customer service. Limited lifetime warranty.


Similar products:
Master Lock 410GRN Green 410 Zenex Safety Padlock with Short Body, 1/4" x 1-1/2" Shackle (Pack of 1)
Master Lock 421 Lockout Hasp with Vinyl Coated Handle, 1-1/2" Inside Jaw Diameter
Master Lock Grip Tight Circuit Breaker Lockout, Standard Toggle
Master Lock 410KARED Keyed-Alike Safety Lockout Padlock, Red
Master Lock 420 Lockout Hasp with Vinyl Coated Handle, 1" Inside Jaw Diameter
Master Lock Grip Tight Circuit Breaker Lockout, Oversized Toggle
Master Lock Rotating Electrical Plug Lockout
Master Lock Standard Group Lock Box for Lockout/Tagout
Master Lock 110-120V Plug Lockout
Brady Laminated Lockout Safety Poster


Master Lock Grip Tight Circuit Breaker Lockout, Oversized Toggle

Top has 3/8" plain hole. Heavy gauge 1/16" steel jaw is zinc plated to resist corrosion, and fits into holes 5/16" or larger. When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials. 15 mil vinyl is water and chemical resistant.

Combines with a padlock sold separately to keep individual circuit breakers in the off position during maintenance or repair projects. Complies with osha 29 cfR 1910147 requirements. Six holes for padlocks sold separately provide the ability to require multiple authorizations to allow access to one locked out device or energy source.

Tightens with thumbscrew then clamps down for firm grip on most circuit breaker sizes. Non-conductive, red vinyl handle coating improves grip and protects equipment from scratching. Circuit breaker lockouts are used to keep the electricity off in a specific circuit by securing the circuit breaker toggle switch in the off position.

Non-conductive, red vinyl handle coating improves grip and protects equipment from scratching. Hasp locking holes accommodate padlock shackles up to 9/32" outside diameter. Top has 3/8" plain hole. Tear-resistant, waterproof, and will not crack, distort, or shrink.


Similar products:
Master Lock 410GRN Green 410 Zenex Safety Padlock with Short Body, 1/4" x 1-1/2" Shackle (Pack of 1)
Master Lock Universal Wall Switch Lockout
Brady Universal Multi-Pole Breaker Lockout
Master Lock 421 Lockout Hasp with Vinyl Coated Handle, 1-1/2" Inside Jaw Diameter
Brady 120V Snap-On Circuit Breaker Lockout
Master Lock Rotating Electrical Plug Lockout
NMC LOTAG36-25 Lockout Tag, "DANGER - DO NOT OPERATE," 6" Height x 3" Width, Unrippable Vinyl, Red/Black on White (Pack of 25)
Brady Clamp-On Breaker Lockout, for 120/277V
Master Lock 110-120V Plug Lockout
Master Lock 420 Lockout Hasp with Vinyl Coated Handle, 1" Inside Jaw Diameter


Do Not Operate" Tag, Polyester, 5-3/4" Height, 3" Width Pack of 12 - Master Lock Heavy Duty "Danger

When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials. Powder coated steel and reinforced polymer materials are durable and resist corrosion. Tear-resistant, and will not crack, distort, waterproof, or shrink.

Scuff-resistant, matte surface is easy to write on with pen or marker. They usually have a hole that can fit a padlock shackle, and can also be used to provide information wherever locks are used. Heavy gauge 1/16" steel jaw is zinc plated to resist corrosion, and fits into holes 5/16" or larger. Lockout Tagout.

Laminated with a clear polyester that resists moisture, greases, oils, and volatile aromatics. Withstands over 50 lb. 23 kg of pullout force, meeting OSHA 1910147c5iiC2 standard. Front of tag reads, "do not operate - this lock/tag may only be removed by:" followed by two blank lined areas labeled "Name, " "dept, " and "Expected Completion".

Red, white, and black "Danger" logo and diagonal red and white stripes on both sides for high visibility. Lockout/tagout loto safety procedures, as defined by OSHA, require that tagout devices be durable and standardized. Thin and flexible 10-mil poly-based material contains no wood-based, paper content, and is more durable than traditional cardstock.




Similar products:
Master Lock 410GRN Green 410 Zenex Safety Padlock with Short Body, 1/4" x 1-1/2" Shackle (Pack of 1)
Master Lock 421 Lockout Hasp with Vinyl Coated Handle, 1-1/2" Inside Jaw Diameter
Master Lock 410KARED Keyed-Alike Safety Lockout Padlock, Red
Master Lock Grip Tight Circuit Breaker Lockout, Standard Toggle
Master Lock 420 Lockout Hasp with Vinyl Coated Handle, 1" Inside Jaw Diameter
Master Lock Grip Tight Circuit Breaker Lockout, Oversized Toggle
Master Lock 110-120V Plug Lockout
Master Lock Universal Wall Switch Lockout
ZING 7066 RecycLock Safety Padlock, Keyed Alike,1-1/2" Shackle, 1-3/4" Body, Green, 3 Pack
Master Lock Standard Group Lock Box for Lockout/Tagout


Master Lock 410GRN Green 410 Zenex Safety Padlock with Short Body, 1/4" x 1-1/2" Shackle Pack of 1

Tightens with thumbscrew then clamps down for firm grip on most circuit breaker sizes. Top has 3/8" plain hole. Limited lifetime warranty. Complies with osha 29 cfR 1910147 requirements. Property of" labels with blank lines for customization and "Danger: Locked Out Do Not Remove" labels included. Lockout Tagout.

Tear-resistant, waterproof, distort, and will not crack, or shrink. Scuff-resistant, matte surface is easy to write on with pen or marker. Reserved-for-safety cylinder with over 101, 000 key codes. Limited lifetime warranty. Limited lifetime warranty. Red, white, and black "danger" logo and lined rewriteable area for task-specific details on both sides of tag.

Thin and flexible 10-mil poly-based material contains no wood-based, paper content, and is more durable than traditional cardstock. Non-conductive, red vinyl handle coating improves grip and protects equipment from scratching. Non-conductive, red vinyl handle coating improves grip and protects equipment from scratching.

Six holes for padlocks sold separately provide the ability to require multiple authorizations to allow access to one locked out device or energy source. 7/16" 1. 1 cm diameter brass grommet accepts all safety padlocks.


Similar products:
Master Lock 421 Lockout Hasp with Vinyl Coated Handle, 1-1/2" Inside Jaw Diameter
Master Lock Grip Tight Circuit Breaker Lockout, Standard Toggle
Master Lock Grip Tight Circuit Breaker Lockout, Oversized Toggle
Master Lock Universal Wall Switch Lockout
NMC LOTAG36-25 Lockout Tag, "DANGER - DO NOT OPERATE," 6" Height x 3" Width, Unrippable Vinyl, Red/Black on White (Pack of 25)
Master Lock Rotating Electrical Plug Lockout
Master Lock 110-120V Plug Lockout
Accuform Signs MLT400CTP Lockout Tag, Legend "DANGER DO NOT OPERATE", 5.75" Length x 3.25" Width x 0.010" Thickness, PF-Cardstock, Red/ Black on White (Pack of 25)
Master Lock Heavy Duty "Danger - Do Not Operate" Tag, Polyester, 5-3/4" Height, 3" Width (Pack of 12)
Master Lock Standard Group Lock Box for Lockout/Tagout


Master Lock Grip Tight Circuit Breaker Lockout, Standard Toggle

Heavy gauge 1/16" steel jaw is zinc plated to resist corrosion, and fits into holes 5/16" or larger. Red, white, and black "danger" logo and lined rewriteable area for task-specific details on both sides of tag. Thin and flexible 10-mil poly-based material contains no wood-based, paper content, and is more durable than traditional cardstock.

Tensile strength of 6, 300 psi to help resist unauthorized removal. Powder coated steel and reinforced polymer materials are durable and resist corrosion. Six holes for padlocks sold separately provide the ability to require multiple authorizations to allow access to one locked out device or energy source.

They consist of a lockable clamp or hasp to immobilize an individual circuit breaker switch. Hasp locking holes accommodate padlock shackles up to 9/32" outside diameter. The master lock grip tight circuit breaker lockout is a red powder coated steel and reinforced polymer locking clamp that tightens with a thumbscrew then clamps down for a firm grip on most circuit breaker sizes and combines with a padlock sold separately to keep individual circuit breakers in the off position for safety during maintenance or repair projects.

Tear-resistant, distort, waterproof, and will not crack, or shrink. Scuff-resistant, matte surface is easy to write on with pen or marker. Limited lifetime warranty. Laminated with a clear polyester that resists moisture, oils, greases, and volatile aromatics.


Similar products:
Master Lock 410GRN Green 410 Zenex Safety Padlock with Short Body, 1/4" x 1-1/2" Shackle (Pack of 1)
Master Lock Universal Wall Switch Lockout
Master Lock Rotating Electrical Plug Lockout
Master Lock 421 Lockout Hasp with Vinyl Coated Handle, 1-1/2" Inside Jaw Diameter
Brady 120V Snap-On Circuit Breaker Lockout
Accuform Signs MLT400CTP Lockout Tag, Legend "DANGER DO NOT OPERATE", 5.75" Length x 3.25" Width x 0.010" Thickness, PF-Cardstock, Red/ Black on White (Pack of 25)
Brady Universal Multi-Pole Breaker Lockout
Master Lock 420 Lockout Hasp with Vinyl Coated Handle, 1" Inside Jaw Diameter
Accuform Signs MLT406CTP Lockout Tag, Legend "DANGER DO NOT OPERATE", 5.75" Length x 3.25" Width x 0.010" Thickness, PF-Cardstock, Red/Black on White (Pack of 25)
Brady Clamp-On Breaker Lockout, for 120/277V


Brady Clamp-On Breaker Lockout, for 120/277V

Limited lifetime warranty. Combines with a padlock sold separately to keep individual circuit breakers in the off position during maintenance or repair projects. Zenex thermoplastic body is nonconductive and functions in temperatures from -70 to 350 degrees F. 7/16" 1. 1 cm diameter brass grommet accepts all safety padlocks.

Powder coated steel and reinforced polymer materials are durable and resist corrosion. Tensile strength of 6, 300 psi to help resist unauthorized removal. Six holes for padlocks sold separately provide the ability to require multiple authorizations to allow access to one locked out device or energy source.

Brady 65396/65396 120/277v clamp-on breaker Lockouts made of rugged polypropylene and impact modified nylon and in red color. Non-conductive, red vinyl handle coating improves grip and protects equipment from scratching. Limited lifetime warranty. Laminated with a clear polyester that resists moisture, greases, oils, and volatile aromatics.

Withstands over 50 lb. 23 kg of pullout force, meeting OSHA 1910147c5iiC2 standard.


Similar products:
Master Lock 410GRN Green 410 Zenex Safety Padlock with Short Body, 1/4" x 1-1/2" Shackle (Pack of 1)
Brady Universal Multi-Pole Breaker Lockout
Master Lock Grip Tight Circuit Breaker Lockout, Standard Toggle
Master Lock Grip Tight Circuit Breaker Lockout, Oversized Toggle
Brady 120V Snap-On Circuit Breaker Lockout
Brady Oversized Breaker Lockout (Pack of 1)
Master Lock Rotating Electrical Plug Lockout
Master Lock 421 Lockout Hasp with Vinyl Coated Handle, 1-1/2" Inside Jaw Diameter
Master Lock Universal Wall Switch Lockout
Brady 123143 Red Compact Lock Personal Kit, Red